Took me 5 hours to do mine. Biggest problem was getting the socket over the sending unit (after getting the connector off). That piece of plastic shroud on the back of the manifold was tilting the socket just enough so it wouldn't go on. Once it was pushed down on the sender everything went...
2013 Tahoe 5.3L 4wd. I've had this vehicle for 2 years. With the engine running after a remote start, if I get in and accidently hit the brake pedal the engine shuts off. It's always done that. The engine will also shut off if I open the hood before turning the key to the run position (that is...
Got another letter from GM stating the passenger front airbag parts are in stock. Called my local Michigan dealer and he did have whatever was needed. Replaced under warranty an off I go!
Here's my experience (I'm sure you'll hear more) which I never could fix. I had a similar problem, passenger floor under the carpet was always wet. Carpet is like a plastic material so it never soaked through (plus Weathertech mats). I literally spent days trying to find where the water was...
I bought a 2013 Tahoe, 133k miles, well maintained, 10 months ago. I'm finding water under the passenger side carpet. It looks like it's running down the firewall right in the corner under the soundproofing and then under the carpet. The AC drain is draining properly and wide open. The thing is...
Well, I did manage to get the socket on. Took photos with my endoscope. There is a plastic shield on the rear of the intake that kept the socket from being straight up. Once I pulled it a little I could push the socket on. BUT, you guys must be midgets or have lady-sized hands ;) . I can just...
I am in the process of changing the oil pressure sensor and screen. I bought a 1 1/16" sensor socket with the sensor. The socket fits the purchased sensor fine, but won't go on the sensor in the engine. 2013 Tahoe 5.3. I also tried 27mm and it also doesn't fit. 1 1/8" is too big and drops right...
It corners better, doesn't lean as much. I don't notice any difference in the ride quality. It was worth the money. Only problem I had installing was the holes in the supplied bushings were too small for the mounting bolts so I had to drill them out slightly. The bar is solid, not hollow, and...
2013 Tahoe stock suspension. Looking for a stiffer rear sway bar than stock. I've found a couple but they seem excessively priced. Does anyone have a recommendation on a reasonably priced rear sway bar? Nothing fancy, just better handling. A few of the links I followed here didn't work (too old...
I had a "delayed" klunk once. I would hit the brakes, or accelerate, and would get a klunk after about 1/2 second. Turns out there was a front tow plate mounting bolt rolling around inside the frame crossmember. It would roll front and back and hit the metal frame. Cheap fix!
Bought the Hypertech tuner to be able to adjust speedo, and shift firmness. Works great for both. I'm going to be towing with it for the first time (had towed with a Jeep with 4.7L). Only other change is Volant cold air intake. Contacted Hypertech about what the best changes might be, and got a...
2 questions: What is the difference between the Accessory pin and Ignition pin? #2: Does anyone know what amount of current these pins are designed to handle?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.