Your problem is 100% sure the front Jouncestops that were missing.
If you want a fresh new ride feeling order a new set of rear coil springs as well. Over time coils do get weaker. Especially with that many miles.
coils have been sold locally.. In my case they were very soft due to 1500lbs in audio equiptment. Without that, you'd be fine.
PLEASE DELETE AD. thanks
You did 3” spindles in the front and 2” spacers in the rear right?
Personally I’d get Bilstein 4600’s or 5100’s. Keep in mind the spindles do not change the length of the shocks. So a factory length shock will work fine.
these go on the coil springs themselves. IF you are factory ride height, this would add 1" of height to your truck.
Your air ride system may be affected meaning it may think its pumped up higher than it actually is, causing maybe a softer ride etc. I am not sure how that would affect anything...
Never tried it with “stock uppers”
Only tried it using moog offset bushing control arms.
They reduced the camber by 2.5 degrees, but I had 4 degrees of camber.
The belltech camber kit is a total waste of money, and made super flimsy also. Absolute junk quality.
In the pictures above I had...
One of the best things I did for the ride quality was cut the steel cup off the frame for the oem front bumpstop. It was slamming against the control arm bad on big bumps.
So I installed belltech 4923 bumpstops flat against the frame. Rides great. Handles good. Alignment is good.
Michigan metal works camber cure uppers, and a bumpsteer kit got mine dialed in perfect alignment.
I could go 3” lower and still have no camber LOL. They are way longer than stock uppers.
Drilled and tapped a hole for the brake line,painted them
Black that was about it.
I’ve done the balljoint flip, and offset bushings.
I have a set of moog offset bushing arms with balljoints flipped for sale in the classifieds section right now.
Here’s the pics from my truck once I did this mod.
I have 2 brand new pair of 35323 rear 1" coil spacers. Will fit 00-20 GM SUV
Located in Conyers GA 30013
$20.00 shipped priority mail
2 sets available. $20.00 per set.
I have a set of MOOG CK80826 upper control arms for 00-06 TAHOE/yukon etc. Upper baljoints have been flipped for lowered applications, see picture
These arms were installed for a very short period of time on my 4/5 drop tahoe when I was chasing a front camber issue. The upper balljoints were...
BRAND NEW - never installed. Belltech 6651 Shock extenders for the rear of 2000-2020 GM SUV. Will not fit Pickup trucks.
This kit WILL NOT work if you have a DJM rear hardware kit installed. You must use the DJM brackets if you're running the rear hardware kit.
These extensions will correct...
I have a set of USED 3" rear drop coils for 00-06 SUV's for sale.
These coils are designed for use with autoride (air shocks) factory.
I installed these coils on my 2wd, rode on them for less than 200 miles, with my audio system they dropped the truck over 5". I assume they would lower a...
I have a USED SSBC A126-42 Front and rear 14" big rotor/caliper relocation kit for sale. Kit has approx 25k miles. ROTORS NEED TO BE RESURFACED/TURNED !
This kit contains caliper relocation brackets for the front, and rear. designed to upgrade your stock 12" front rotors to a 14" slotted...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.