Resolution:
I swapped out the blower motor resistor and the problem persisted. I put the original resistor back in and swapped out the blower motor assembly itself and it fixed the issue. Very simple and straight forward fix and it only cost me around $45. Thanks all for your help.
Noticed the other day that the hvac fan in the cabin has been surging (high then low). It is more pronounced when the fan is turned up high. Today I noticed it is making a grinding noise as well. Any ideas where I should begin my search?
I want to swap my stock halogen lights for LED Lights. I also have the stock housings. Can this be done simply by using the included driver plug and play kits or is modification necessary for them to work properly?
08 Yukon XL Denali.
I am looking at switching my headlights to LED. My housings are cracked and beyond repair. What is the best housing to get for an LED application. I like the look of smoked housings and would like a more modern look. What do y’all recommend other than the MORIMOTO XB housings and lights?
Thanks swathdiver. I’ll check those out and see if that’s the issue. Are those clips simple plug and play into my old brake components or do I need to replace everything if that’s the issue?
I Checked the hubs front and back. If anything, the back passenger hub has a tiny bit of clunk. I’ll put that on the list. All the wheels seemed to turn alright. Didn’t seem to be any excess grinding and each wheel could be spun around a half turn by spinning in with moderate force and letting...
2008 Yukon xl Denali. I’ve got an annoying minor squeal when I initially apply braking pressure that quickly goes away after initial contact. It also squeals when driving around a corner to the left without braking. I haven’t noticed it when turning to the right. What should I be checking for...
I don’t believe that’s a crack. Looks more like an oil saturation line. I haven’t broken into the inspection cover yet but it is totally wet with oil now. Also, the lower edge of the oil pan has an oil line along the bottom. Apparently replacing the oil block off didn’t do anything. Probably...
Well I finally got around to replacing my oil cooler block off plate that I suspected was leaking. Replaced it with a bullet block off plate that several of you recommended. Problem is I still have oil dripping onto my driveway. Not coming from oil pan, filter or block off plate. Maybe someone...
Anyone know what block off plate an 08 6.2 uses? I’ve seen untold numbers of styles and I want to make sure I have the right one before I just take it off.
Cleaned the Yukon today and when I took the second row mat out (which was dry) I found the carpet was wet on the passenger side. I pulled the trim and didint notice any leaks or signs of leaks. The insulation underneath the carpet is totally saturated and the carpet smells like mildew but only...
Hey all. Just noticed some oil stains on the driveway tonight. Just took some quick pics so I can share them with you guys. I will probably investigate more in the coming days. Anyways, has anyone had an oil leak from the areas in the pics? The pics are looking towards the front from behind the...
Figured I’d follow up with the solution. I couldn’t get the box to stop bouncing. In fact it was near hazardous going freeway speeds with the factory bars. Picked up the Yakima Slyline bars and now the box is rock solid even at freeway speeds.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.