thanks for the info guys. i dont think body drop trucks ride rough. personally mine rides pretty nice considering all thats been done thus far. i put .250 rubber pads under my mounts after i milled an inch off the cups and trimmed the post. i have no squeaks rattles nothing. steve meade has...
thanks for the positive feedback guys. tires r 285/35/24. I have thought about color matching the handles when i sprayed the tailgate and rollpan and had the gun loaded but then i decided to jus shave em like everything else on it. Think im jus gonna bag it as well. Any thoughts pos. or neg. i...
weather got better so decided to get this truck finished and dropped lower with a good/decent ride. jus got home and measured 31 5/8 at all 4 corners rides not bad either. surprised at the drivability i still have and not much rubbing i expected worse. thanks to all for the good info on here.
final num. 31 5/8 front 31 7/8 rear shocks were holding me up with the drop brkts. put light duty on dropped right down. might settle a lil more in the rear now since theres some weight on those springs. like to b down around 31 1/4 f 31 1/2 r. Thanks for the positive comments!! And showing the...
i have the same problem. 1/4 tank let it sit wont start. several times i jacked up on the front drivers side jus a lil turned key on let it sit a sec and it starts everytime. or like u said add a lil gas. no clue.
did u use 5 smd led or the glass lookin 5mm one? i used the smd led in red and mines pretty bright. i used the 5mm glass lookin ones for my headlight switch ,window switch heater controls (all 3). like to do my factory radio anyone done this?
i used 2500 hd keys theres plenty room to play with up or down along with 2" spindle.worked out well and my alignment shop had no probs. im at 32.1/2 now. letn those keys out might get me 31 3/4 maybe 31 1/2 with a camber kit.
i removed the rubber completely,milled 3/8 off each cup,milled out the center section,placed rubber sheets i cut to cup size n between and bolted it back down.rides actually not bad.can get about a 1/2 more it seems from looking around under there.
im taking the running boards off this wknd and...
nice find. my ss bumper cover was jus a few screws and double stick and two brackets for the bottom. ez install got it from cervinis 249 shipped. b back from paint next week he said. i jus body dropped mine it still acts right too not to bad a ride. pics on suspension forum posted yest check it...
thanks the rollpan is actually for a 2000 burban i had i believe it came from stylin bout 3yrs ago. the brand i think is pirahna. full pics wed
measured today only 20 miles on it
32 1/2 front 32 3/4 rear might come down a lil more after a few miles i hope.
maybe ill try a diff line conv. i guess my question is: running out of the back of the (factory) headunit is that a full power signal or a low level signal? because essentually thats the input for the factory amp. and also out of the factory amp does it crossover/cutoff the lower frequecies so...
factory stereo non-bose amp behind glove 02 tahoe
Need to get a full audio signal for my high/low box so i can run it into my dsp. When running out of the factory amp to the h/l box it lacks lows like 150 and under which does no good for the sub out on my dsp. the factory sub out im...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.