Search results

  1. MadMax_MFP

    Pushbar suggestions

    Don't forget Federal Signal as that is the push bar system I have on my 2018. They make some great looking push bars for the newer Tahoe with headlight and TVI lower bars.
  2. MadMax_MFP

    HPtuners recommendation

    Same here, any recommendations from anyone on HPTuners version to use? Any extra modules needed?
  3. MadMax_MFP

    Correct Carpet Part Numbers

    For reference only based on my 2018 PPV Tahoe, here is what I have on my Tahoe seating arrangement as the different seating changes the carpet information, the following is only correct for the 40/20/40 front seats without console and no third row seating. Use your VIN and QR code (or glove box...
  4. MadMax_MFP

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    I installed the PPV 6 piston Brembo front brakes and installed the Belltech 2"/4" drop at the same time. Before and after pictures below but unfortunately I did not see the sun shadow so the before picture is hard to see how high the rear was sitting. Much better stance, ride and braking now.
  5. MadMax_MFP

    Correct Carpet Part Numbers

    Let me pull up my receipts from GM and I will post up the part numbers and general cost. Your pricing might be different as I have an account for my shop.
  6. MadMax_MFP

    Brembo part numbers

    RockAuto - GM GENUINE 84793058 is the right side Brembo 6 piston PPV caliper
  7. MadMax_MFP

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    That is a nice looking roof rack! Thanks for the pictures as I have pulled many headliners but not with ac routed through it so this one will be less fun.
  8. MadMax_MFP

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    That is coming next.
  9. MadMax_MFP

    2015 Tahoe Seat Swap

    What dimensions are you looking for? I have a 2018 PPV that I just did most of the interior in it (no headliner work yet). Be advised that you might need to source seatbelts if no seats where installed, especially the third row seatbelts.
  10. MadMax_MFP

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    So I decided to gut the interior this weekend. I was able to find all the upfitter remnants and remove them along with finding all the oem harnesses so I can connect the lighting I want to install along with add the trailer brake control. Turned out to be a bigger job than I thought as it took...
  11. MadMax_MFP

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    It is here in the desert, LOL! Unfortunately my wife is disabled and a lot of the extra stuff she needs really makes it hot for her, kind of like wearing a thick coat in the summer so anything to make it cooler wins.
  12. MadMax_MFP

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    I swapped the 2nd row seat to a matching cloth seat from a Suburban and started the Brembo 6 piston swap with Belltech 2/4 drop.
  13. MadMax_MFP

    PPV spare tire

    Nice! Is that a Nathan Airchime P3 or K3?
  14. MadMax_MFP

    Correct Carpet Part Numbers

    NVR mind, I found the info on another site.
  15. MadMax_MFP

    Correct Carpet Part Numbers

    Bump, anyone?
  16. MadMax_MFP

    Correct Carpet Part Numbers

    Also, mods if this should be in the interior section please move. Sorry out that.
  17. MadMax_MFP

    Correct Carpet Part Numbers

    Hi All, after doing a lot of research I have found several part numbers for my 2018 PPV carpet swap. Hopefully someone here has a better insight to the GM part numbers before I order. The first thing I did was obtain the rpo codes for my vehicle but oddly enough the QR code does not show all...
  18. MadMax_MFP

    New user intro

    Welcome to the forum and local to me too. I just picked my up (well it was shipped) two weeks ago and I am in the same boat, lots of reading and learning as my list of to do's is growing. Looks great!
  19. MadMax_MFP

    What 3 parts would you choose and why…

    Engine Transmission Interior I like the thought of the extra engine/transmission to modify and have a backup in case the potential engine or trans grenade. Anything interior simply because of wear and tear and since these items seem to get discontinued by the manufacturer to soon in my book.
  20. MadMax_MFP

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    Since I just took delivery I decided it was time to do an inspection from front to rear. Oil, filter, trans fluid, air filter and cabin filter all replaced. Pulled the front and rear tires to inspect the brakes and suspension and to see what will be involved in lowering, adding Brembo big front...
  21. MadMax_MFP

    New to me PPV

    This is the LF PIT mount behind the front facia that goes from the PIT bar that passes thru the front facia and mounts to the frame. I removed the front tire and inner fender for these pics.
  22. MadMax_MFP

    New to me PPV

    I would love to hear some of those stories. Here are the pics of the left front PIT bar. I can only upload 5 so I will add the last pic in another post.
  23. MadMax_MFP

    New to me PPV

    Absolutely! The PIT/TVI bumper is what got my attention to this one and had to have it. I will be checking out the mounting this weekend as I too want to see how it is attached.
  24. MadMax_MFP

    New to me PPV

    Thanks! I plan on getting more pictures this weekend.
  25. MadMax_MFP

    New to me PPV

    Thank you and it does appear to be well maintained.

Forum statistics

Threads
129,218
Posts
1,812,292
Members
92,318
Latest member
MrLeritz

Latest posts

Top