Search results

  1. ARAMP1

    Water leak

    I had a pretty bad leak mainly on the driver side but it would get to the passenger side every once in a while. I was certain it was the sunroof. I cleaned the drain hoses over and over, I cleaned the seals and tracks and it didn't fix it. Then just decided to RTV the GPS shark fin antenna on...
  2. ARAMP1

    Is a Tech 2 Still The Way To Go?

    Is it just a program that one could run on a Windows 10 laptop?
  3. ARAMP1

    Is a Tech 2 Still The Way To Go?

    I have the dreaded Service Stabilitrak that randomly comes on when I turn my wheel. No codes picked up by the BlueDriver code reader. Figured I'd bite the bullet and pick up a Tech 2...Several on ebay in the $400 range. I don't mind spending more if there's something else out there that's...
  4. ARAMP1

    Replace Headliner...With Screens to Without

    Bringing this thread back... Has anyone redone their headliner lately?
  5. ARAMP1

    2013 Tahoe LTZ Driver Door Pull Review Share - Highly Recommended

    Here are the ones I ordered. They definitely are better than the broken stock pieces. Apparently there are some with studs in the handle that go through the holes you drill out in the door panel. And some, like the ones I purchased that have screws that screw through the back of the door...
  6. ARAMP1

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    My Yukon stopped being a daily driver around early 2017. I drove it when the roads got bad (since it had 4wd). But really, it's mostly sat until today. Other than the battery going bad from sitting, another thing is that it was never washed. I've never been into detailing cars, it's so...
  7. ARAMP1

    Plastic Carpet Trim

    Yeah, that's what I took it to mean with the imprint in the carpet.
  8. ARAMP1

    Front Dash Crack

    I saw a video or a picture a while back of someone laying down some fiberglass on the back side of their dash. I was wanting to do something like that but fiberglass doesn't always stick to plastic so well. Buuuut, if there was a dash that was already fiberglass, I could go ahead and load up...
  9. ARAMP1

    Front Dash Crack

    Has anyone used this?
  10. ARAMP1

    Plastic Carpet Trim

    Hmm mm, interesting. Are they melted in place while the carpet is out? Wonder if I can 3D print some mounting points that can be attached to the floor through the carpet.
  11. ARAMP1

    Plastic Carpet Trim

    There are some plastic trim pieces in the carpet around the third row seat mounts. How do these come out? Years of hauling kids and dogs around necessitate a thorough cleaning under them.
  12. ARAMP1

    Cracked dash solution

    It probably wouldn't be too difficult to draw something up in CAD then 3D print it.
  13. ARAMP1

    Cracked dash solution

    Yeah, didn't think of the automatic climate controls. There's a couple truck dashes that are pretty good condition too, and I do like the truck dashes, but I'm wondering how much of an abomination it would be without the center console.
  14. ARAMP1

    Cracked dash solution

    I have several Escalades that are being parted out in my area...all with perfect dashes. And they're cheap. $200-ish. I've been looking for a dash for the Yukon off and on for years now. I'm tempted to pick up an Esky dash and center console. I'm assuming that my Yukon instrument cluster...
  15. ARAMP1

    Mirror Motor Rebuild

    I just did a folding motor rebuild with gears and motors from gruvenparts.com. The first rebulild went great and after cleaning out the power adjustment motor and gears, I basically have a brand new mirror! I did the second one and am running into some issues. I noticed that it was just a...
  16. ARAMP1

    Escalade Roof Rack and How to

    Ah, I'm getting rid of the standard rack and putting an Denali rack on.
  17. ARAMP1

    What are ya’lls plans with engine/chassis when it’s quitting time?

    Oh, I won't be doing the work... I'd be dropping it off at Duramax Specialties if I end up going through with it.
  18. ARAMP1

    Escalade Roof Rack and How to

    I pulled my standard roof rack off today and a couple of the threaded inserts were loose. One was spinning. This one was the only one lifted up. Might be because I lifted it to get the vise grips under the mount to get the bolt out. What's the fix for this? I could probably cut them out...
  19. ARAMP1

    What are ya’lls plans with engine/chassis when it’s quitting time?

    200K on the clock now. Really contemplating pulling the body off the frame and adding a Duramax/Alison.
  20. ARAMP1

    2013 Tahoe passenger side door handle cracked

    Okay, they arrived and they fit...sort of. Apparently, there are two kinds of inner panels. Some have a plastic frame and some have a metal frame. I have the metal frame and these appear to be for the plastic frame. You can see in the picture that my old ones have clips and the new one...
  21. ARAMP1

    Escalade Roof Rack and How to

    Might have missed it but how are you sealing the bolts from the elements?
  22. ARAMP1

    DL3 Mirror Repair Tutorial

    I'm about to pull mine apart and replace the motors. Picked up some of the brass spur gears from GruvenParts.com. My driver side looks burnt. I was reading somewhere that it was the auto darkening portion that failed. Hopefully I can find a replacement glass.
  23. ARAMP1

    Front Dash Crack

    I thought that too, but it seems that P/N 19331331 is the one with the center speaker...
  24. ARAMP1

    Door Latch Cable Release Tool

  25. ARAMP1

    Front Dash Crack

    Thinking about replacing my cracked dash. This is currently what I have...P/N 20959607 Looking online for my year make and model, I find P/N 23224747 which will be about $1250. But, if I look up my part number that I have, it translates to P/N 19331336 which is $1450. So, with those in...

Forum statistics

Threads
138,085
Posts
1,998,557
Members
103,011
Latest member
Dh1280

Latest posts

Back
Top