Yes there are several companies that sell the shaft. Skyjacker GM10146DS, super lift 3287, and rough country 5083.1 are just a few.
I read somewhere on a lift instructions that if you drive highway speeds in 4wd you might notice vibration. To fix it replace the shaft with dual cardan. Be...
Front driveshaft u joint angle is causing that issue. You need a dual cardan shaft if you plan to drive in 4wd at highway speeds. Even RC will tell you the same.
I would get the zone boxed upper arms. Best price for quality arm. This helps down travel to max on lower arm while upper arm gains clearance to the droop stop.
http://zoneoffroad.com/zone-offroad-products-suspension-upper-control-arms-chevy/c2310
Hey guys sorry been busy with a new boat purchase so haven’t been on here daily in the past month.
As far as the travel range you will need a 4wd Prerunner or race kit from Baja kits. Expensive but complete new front end. 9” travel stock.
11.5” travel...
Yeah I got mine and separated them to get chrome. Love them! Think there are a few sets still available or could be sent to chrome like mine. Best upgrade for fogs!!
Escalade looks great! Trim front valance up to bumper edge. Yes you can delete the magna ride. Put coil overs on it. It will ride awesome then.
2017 Denali XL BDS 4" with Fox coils and rear shocks. MRC delete, night and day ride quality!!
I got 50% ceramic on my shield and it still cracked. Definitely prolonged the event. I repaired it for now to see how long it will hold before cracking again.
That looks right for the tire size. You will gain an 1” off tires swapping to a 275/60R20. If you want to push the tire size and go up in weight then a 295/60R20. You will probably have to trim to clear the but will fit on stock wheels.
Brackets look right. Maybe I’m mistaken on fender heights but thought most levels are 39”. That also depends on tire size. Most are 33s. The front fender is cut higher than rear so it looks like the rear sags when truly level.
Haha no worries measure from ground to center of fender. Should be about 39” front and rear. The rear all depends on before measurements. Some vary about an 1” so maybe worn springs or more wear on them.
Thanks! We will see how it holds out. The air bag crack has been in it for 6-8 months and nothing else cracked yet so thinking it might survive another couple years.
My intent was to replace it but dealers won’t give me any discounts. So that left me with trying a repair or paying $550 for one part of the two piece dash. Online price is $315 plus $200 shipping so didn’t save much there either. I know a couple dealers a few hours away that I can get...
Well my dash finally cracked at the air bag. I decided to try and salvage it. During the process getting it out another crack occurred at the center speaker. I fixed all cracks with the hot staple gun and jb weld plastic bonder. The center clip to hold the front dash has always been missing so I...
Any 4wd truck front end lift kit will fit on an Escalade. The problem is the front driveshaft and auto ride. Any awd needs a new dual cardan front shaft. This is because of the angle it rotates will cause vibrations. New shafts are about $500. Then the auto ride needs to stay in tact otherwise...
Yeah that’s what most of us end up doing with bigger tires. I keep mine set at 40 psi. Chalk test is pretty good determination for air pressure and this article helps calculate it out too.
https://www.4wheelparts.com/a/tire-wheel-package-guide-tire-pressure-checker
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.