Search results
-
Your Vehicles as they sit now....
They fit as if they were designed for the vehicle I think the Ram center is 77.9mm and the escalade is 78.1 and that 0.2mm is not enough to bind them up, I would say both RAM sets fit perfectly on the hubs and the OEM escalade wheels feel like they fit loosely on the hub center.- LSCALADE
- Post #2,843
- Forum: Member Photos
-
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Those look awesome and by the look of it, they are probably way lighter than the OEM PPV Tahoe option which uses all steel rotors and I bet those weight a hefty amount. If you can combine this set up with a light weight wheel this will make the truck perform 10x better in every situation.- LSCALADE
- Post #50,656
- Forum: General Discussion
-
Rust repairs
Found them on ebay around 225$ but the listing has gone missing, they had one set. They are the typical chineese made ones, I really wanted the Buschwacker but don't feel like dumping 500$ on that set. Cheaper is better for this vehicle. Any money sunk in it will never be recovered. -
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Consistently my escalade holds 210-212F at steady state highway driving with 75F outside. Right after the install of these it was sitting at 208F which is not much but I think that with a little bit if hood extraction, there is likely better air flow through the radiator. Really need to test...- LSCALADE
- Post #50,650
- Forum: General Discussion
-
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Functional hood vents they do actually work.- LSCALADE
- Post #50,640
- Forum: General Discussion
-
Rust repairs
Test fitting the fender flares, I think it will work out. -
Rust repair
Just did this to mine this weekend, there were tiny specs of rust, when I started sanding down the pore opened up and what looked like a tiny dot had a quarter sized circle of rust underneath. Finished it off with primer and rustoleum paint. -
Rust repairs
Lesson learned, never ever buy a car that is dirty or in my case covered in salt in the middle of winter. As soon as I had a chance to wash it, I noticed a bunch of little specs of rust at the bottom of the doors and the front fenders and even the quarter panels, so I had a plan for the... -
Suburban/ Yukon XL 2500 Bull Bar
I have that same bar on my Escalade and it works awesome for mounting all types of lighting that I am testing and plus I love how it looks. -
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Same thing, I scraped down to metal all the rust and applied several layers of etching primer and rust prohibited to stop it and the flares will hide the not so perfect fender edge paint where I did the repairs.- LSCALADE
- Post #50,434
- Forum: General Discussion
-
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Yes sir, any RAM 1500, Jeep Wagoneer which is on a RAM chassis, all have the same bolt pattern as the GMT900 and the center bore is within 0.3mm diameter so they fit on our hubs. They run slightly wider offsets so the wheels tend to step out closer to the fender edge by a good 5-10mm without...- LSCALADE
- Post #50,433
- Forum: General Discussion
-
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Car is dirty and I am working on fixing rust before the fender flares go on but I scored a set of Wagoneer Overlander wheel and they look sweeeet.- LSCALADE
- Post #50,419
- Forum: General Discussion
-
Your Vehicles as they sit now....
Stepped up to a 20" wheel/tire from the 18" the look is different but the comfort is reduced somewhat, the road imperfections are more jarring but it does feel better at highway speeds. Wagoneer Overland OEM wheels.- LSCALADE
- Post #2,841
- Forum: Member Photos
-
Your Vehicles as they sit now....
The van is actually bigger as it is also taller on the inside, the Escalade is great overall vehicle even though it lacks a lot.- LSCALADE
- Post #2,834
- Forum: Member Photos
-
Headlight housing interchangeable????
The Yukon and Escalade share the same fender, on the Escalade there is a vent but the shape around the headlight is the same, with that said the hood and bumper will need to be swapped if you want to install escalade headlights. I would recommend to get aftermarket OEM designed syle...- LSCALADE
- Post #10
- Forum: General Discussion
-
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Ram 1500 wheels 18" factory 5 spoke design it was available as an option on base trucks to step up from steel to aluminum. Imposter sells wheel covers, so for around 50$ I was able to get the shiny black plastic skins to turn the silver wheels into black wheels and actually protect the wheels...- LSCALADE
- Post #50,367
- Forum: General Discussion
-
Adding Flex Fuel to non factory flex fuel Denali
Mine is a Flex Fule since its L94 2011 however I too run mine on 87 and I add E85 to boost the octane to around 93, and there are some calculators out there but as a rule of thumb its 2:1 so for every 2gal of 87 I add 1gal of E85 and my knock retard sensor has not indicated any adjustment...- LSCALADE
- Post #4
- Forum: Performance
-
2013 Yukon XL w/ Retractable Running Boards - Need Reset Procedure - Help Plse
Is there a fix for them not properly folding in, the front section folds all the way but the rear section is lazy and retracts 70% of the way and requires a light tap with your foot to close it all the way. ANy ideas? -
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
Gave the old girl a good wash, will need to do some good rust stop and some repair before we put the Z71 fender flares. Here is how she looks today. This is how it started 3months ago. I think I totaly overpaid for it but I am making the best of it. 2011 Canadian spec, has 208k miles...- LSCALADE
- Post #50,363
- Forum: General Discussion
