Search results

  1. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Well I guess wheel whore Wednesday it is. Dude came to trade these kmc 22’s for my fuel 20x10s, walked up and spotted the declads that I have and said I want those. So the declads had a good run. A solid 2 days lol. Dude had a pretty Tahoe too!
  2. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Might end up with a different set of wheels today haha I’ll still have the declads tho.
  3. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Let the air out of the rear helper bags to about 5psi and it dropped the rear a 1/2 inch. Decided since I’m gonna be inside the wheel Wells now that I need to go a little lower. So 5” drop springs and front drop keys might be in the near future. This look is starting to grow on me. Which might...
  4. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Mounted the declads. Got ahold of the wheel manufacturer of the 22’s I want. They have been back ordered for like 2 years now. Was told they are usually sold out of multiple shipments before they even make it to the states. Also was told his July shipment had a few unsold sets currently in the...
  5. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Found a score on some tires today. Was planning on going with a 285/50 like my nittos or maybe a 265/50 just trying to stay with a slightly smaller sidewall but I couldn’t resist when I found these 275/55 take offs for 50 bucks. Old man pulled them off at 20k miles to put on some beefier tires...
  6. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Well I need to learn to not tell people that I’m in no rush. Cause I was starting to get a little antsy. Almost 3 months later I finally get ahold of the local tire shop I had fix the wheel. They got it done. It was only 30 bucks so I can’t complain too much I guess. Picked it up and back to the...
  7. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Well I need to learn to not tell people that I’m in no rush. Cause I was starting to get a little antsy. Almost 3 months later I finally get ahold of the local tire shop I had fix the wheel. They got it done. It was only 30 bucks so I can’t complain too much I guess. Picked it up and back to the...
  8. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Haha well thank you! Honestly I still want to do some more tidying up in there but all in time. Done it a time or two now hah. Thank you! Thank you! Thank you just need to get on your level of paint maintenance now!
  9. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Friday after work I got two more runs of speaker wire to each door, got the second DC 90.4 4 channel installed under the rear driver seat, and both panels installed after putting my handles and switches on them from the stock door panels. The speakers that are in these doors are super cheap pro...
  10. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    I think the wiring just looks that much crazier because the only thing differentiating the power and ground is the heat shrink color on the ends so it blends together lol. I got most of it tied off and managed now so it looks a little better Had the first audio competition of the season a...
  11. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Took a few pictures of the equipment in the denali I don’t know why I didn’t think to take pics of the whole truck it was insanely clean though. I had seen it back at 2017 at a show but hadn’t seen it again until today. I know some of it looks messy but he is in the middle of returning it to...
  12. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    I messed up on that last post with picture order lol. Got the mechman H104L harnesses connected to bump the voltage up. And it worked as you can see in the last post voltage cold is sitting at 16 then once it warms up it has been sitting around 15.5-15.8 which is perfect. It’s insane being able...
  13. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    First item was to move a ground from passenger to driver side then while I was under there I re cleaned all the frame grounds and re installed. Luckily between my scraps and my buddies scraps of wire I had enough to redo everything. Since the limitless sat on its side with the power and grounds...
  14. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    So at 89.6 pounds it’s heavier than my limitless was but it’s also about 3x the power id say the balancer sits on a little acrylic holder I also got from LAF but I used some rubber isolators to keep as much vibration away from it as possible. Yesterday at around 4 I finally started to...
  15. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    After waiting a full week for hardware to finally show up I got the bank assembled and it was sitting at about 13.6v. Got the balancer connected and charged it to 15.6 in prep to go into the Tahoe. Since I do have the battery in front of the sub box it will see a lot more vibration so I put a...
  16. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Alright the past couple weeks has been a shit show to say the least! had a bunch of problems with shipping. Everything took longer than expected for the battery stuff but as of last night it’s all done...almost lol. I’ll get to that. so the LAF acrylic batter case came in. As you can see its...
  17. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    it’s about to get crazier too lol.
  18. Thatsquishykid717

    BANDPASS BOX BUILD 2 SUNDOWN Z V5 15S

    Find a reputable designer and pay the 40 bucks for a cut sheet/design. They will send you a 3D printout with all the cut dimensions and everything. You can talk with them and have them design exactly what you want. Check out bassahaulic productions, ez db designs, or jeepandbass they will get...
  19. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    those work and don’t look to bad! problem for me is the drop spindles making 17’s hard to fit without cutting my ball joint stud. We don’t have that harsh of winters and no salt on the roads. Some de icer yes but if I end up driving anywhere with bad roads it gets washed off quickly. So the...
  20. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    No joke I know it’s been a long ass time I need to be better at keeping this updated haha. Yes that is very true about the seats I have looked into doing that as well but gonna be expensive if I go that route and most of the seat companies I have seen only do leather not any cloth. So I used...
  21. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    So since last year a local buddy has bugged me about buying my limitless lithium battery. Which I have been down to sell it but there was a big jump in people wanting lithium cells and everywhere was sold out of most options for awhile. Last week he hit me up again and o saw the ones I wanted...
  22. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    Dropped the dinged up wheel off at a local tire shop that does repair and straightening. Waiting on that currently. Think I’m just gonna have them powdercoated a oem looking silver. Plan is to have these as winter wheels. And possibly sell the fuel setup to step up to a 22” wheel.
  23. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    so I got them stripped pretty quick of the cladding and foam. Then as life will happen I got busy and they sat till last month. Finally got the tires off and taken down to the powdercoater. He ended up acid dipping them but there was a little corrosion around the lip and in the center. Walnut...
  24. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    I have been slacking bad! a couple of updates. So 10/24/20 I picked up these declads. One wheel has a ding in the lip but the rest are good. Got them stripped right away and messed with one wheel trying to strip it. Used a full can of aircraft paint stripper on it then said screw this lol...
  25. Thatsquishykid717

    2001 Team DC Audio build (2025 revive)

    If I reupholster the back captains then yes most likely. But also thought about keeping them the 03+ pattern and hopefully find some 03+ front charcoal seats. For now they are gonna stay what they are though. Got quoted 375 per seat to have them reupholstered so weighing out my options. Haha...

Forum statistics

Threads
137,672
Posts
1,989,114
Members
102,675
Latest member
j_jerry79

Latest posts

Back
Top