I’m back all. The fuel pump permanently fixed the low fuel pressure issue. The new plugs and wires permanently fixed the p0300. I originally bought all ACDELCO. Iridium plugs I believe and wires. Replaced them with ACDELCO copper plugs, advance auto wires.(which I was less than impressed with.)...
Just incase there is anyone else with similar issues, my p0300 still comes and goes. I changed the spark plugs and wires again yesterday. I was thinking maybe I cracked a plug or something. I’ll have to see if the engine light comes back on.
Good evening everyone, the symptoms more or less went away for most of the summer and fall. All but an off and on random/multiple misfire code. I checked the coil packs. Found a few arching out. Replaced all 8 in the end. Problem still occurs. The other day the thing wouldn’t get out of its own...
Good morning all, this problem has been on going on and off still. This vehicle is my 3rd and a plow truck. So I usually don’t drive it. But I have been lately. After some digging around I found the coil pack on the first and last cylinder on bank 1 arcing out at night. So I ordered a set of...
I just meant half cylinders. lol. Yes fuel trims are normal fluctuating regular. Then when it does its thing. Straight to 25% positive. I don’t remember where I bought the plugs. Mine fell off when I checked them. So these are better
Hey guys, first post here. Don’t chew me out too bad if it’s just something easy and I have over looked. My Yukon will drive all day with no load, if and only if I stay under 25% throttle. If I give it more it stumbles. It won’t go above about 3500 rpm up or down hill doesn’t matter. It will do...
Hey I am a new guy on here. I have a similar issue. I’m in the rust prone area of the world. The wheel bearing seems tight to me. I have not had the brakes apart. I just bought it and the previous owner said wheel speed sensors. It’s possible. But from my experience the bolt doesn’t walk out. It...
I would just like to add to this old thread as a new member, the gauge clusters are no good. Most of the time. But it’s a simple fix. Remove send out for rebuild and replace
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.