Search results

  1. YukonGTmaster

    97 Yukon GT “Rustoration”

    Still going. The front fenders were quite rusted out. I could order new front fenders, have them shipped to Canada, wait 4 weeks, try to put them on….not fit… We are going to fix the originals.
  2. YukonGTmaster

    97 Yukon GT “Rustoration”

    Passenger rocker and backing plate....rough shape
  3. YukonGTmaster

    97 Yukon GT “Rustoration”

    Front Fenders are off. Taking things apart is easy, it’s the putting back together properly that’s tough.
  4. YukonGTmaster

    A/C refrigerant capacity??

    I’ve got a 1997 Yukon GT 2 door. See attached factory sticker on accumulator.
  5. YukonGTmaster

    Please don't laugh... Quick Fix for a Oil Pan / Timing Cover oil leak

    I was getting tired of the oil stains on my garage floor too. I have heard from guys on the forum that doing the oil pan gasket on the 4x4 is a real PITA! I decided to crawl under there with my rags and my torque wrench, and see what those oil pan bolts were doing. I found that many had backed...
  6. YukonGTmaster

    High beams on and so are my low beams at the same time.

    Nice truck Man!
  7. YukonGTmaster

    97 Yukon GT “Rustoration”

    Passenger Rear quarter sealed up.
  8. YukonGTmaster

    97 Yukon GT “Rustoration”

    Inside of lower forward rear quarter. Rust cleaned up, ready to weld in new section. Bumpers sandblasted. Pinholes through driver’s side front corner.
  9. YukonGTmaster

    97 Yukon GT “Rustoration”

    Cutting out the rear lower quarter and wheel arch.
  10. YukonGTmaster

    1997 Tailgate hinge completely rotted off body

    The hinges will be salvageable if the mounting face is ground flat down to bare metal. The truck body section may have to be cut out, sandblasted, and new sections welded in, primed and painted.
  11. YukonGTmaster

    Yukon GT Door Decal

    I have searched the end of the internet and GM Dealerships, looking for OEM “Yukon GT” door decals. I purchased some reproductions off eBay, that were advertised as being true copies of the originals. When I received them they did not pass the OCD test. Grey instead of Silver, and the font and...
  12. YukonGTmaster

    97 Yukon GT “Rustoration”

    I have embarked on the task of eradicating the rusted panels on my 2 door. I have all the common Canadian GMT400 rusted areas. Lower rear quarter, lower door skins, rocker panels, and wheel arches. I purchased the body repair panels from LMC Truck and Mill Supply. I started today by removing my...
    • YukonGTmaster
    • Thread
    • 2 door 97 yukon bodywork fender flare fkare nuts rust repair yukon gt
    • Replies: 17
    • Forum: Exterior
  13. YukonGTmaster

    What shocks

    Rancho 5000. Smooth ride and good looking.
  14. YukonGTmaster

    To wrap or not to wrap, that is the question

    I would go with the Red.
  15. YukonGTmaster

    Rough Idle - problem solved

    I went with OBDLINK MX+ bluetooth scanner. I downloaded DashCommand off the App Store, and did the in App GM Extended Parameters for $9.99, which allowed me to read Cam Retard Offset to dial in the distributor.
  16. YukonGTmaster

    '99 Yukon Rough Idle and Unknown Noise

    I had a rough idle, stumbling, and a high pitched squeal which I thought was a vacuum leak. I did the Felpro intake manifold gasket kit and MPFI Spider upgrade. Problem solved.
  17. YukonGTmaster

    Rough Idle - problem solved

    That mark does not look like the TDC groove on your harmonic balancer. It should be a defined machined groove perpendicular to the balancer wheel. That mark you have it aligned to, looks very suspect. Note the mark on the attached picture. I would pull your belt off and rotate the balancer...
  18. YukonGTmaster

    Rough Idle - problem solved

    Yes! Remove the serpentine belt before turning the crank with a socket and ratchet.
  19. YukonGTmaster

    Solved! Snapped Bolt at Body Mount!

    I blindly sprayed penetrating fluid through the lightening hole in the frame in hopes some would hit the exposed threads on my remaining bolt. Like you said I backed the bolt out and every so often would reverse the ratchet and put it back in. I am happy to say it came out, and the bolt was in...
  20. YukonGTmaster

    UV Degraded Headlamps

    If they were original I would say keep them. Have you ever tried listing things for sale on Facebook Marketplace? I never throw anything away without listing it first. You would be surprised what people want to buy, and you could put the money towards your recent GM parts purchase.
  21. YukonGTmaster

    Cruise Control

    I recently changed my Multifunction Switch (Turnsignal Switch) because of the constant ticking noise. My cruise control had not worked for about 5 years. Cruise Control is now operational again.
View older results

Forum statistics

Threads
137,670
Posts
1,989,082
Members
102,675
Latest member
j_jerry79

Latest posts

Back
Top