Search results
-
Horrible noises and ride, HELP!
I saw a different thread about this and I was just unsure. I’d love if someone could confirm with a picture from their own truck- DaveLaz
- Post #28
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
- DaveLaz
- Post #24
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
Yup I’ll post a pic below. Great questions! -Everything was torqued down when set down on the floor. I did this multiple times including even driving slowly around the block and pulling back in and torquing everything. -I do not have a pan hard bar. That was next in the plans after I...- DaveLaz
- Post #23
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
Correct and I 100% appreciate all the help so far! I just know for a fact that the ride I’m experiencing is not due to the shocks I have. Once I figure out the issue I will most definitely look into Bilsteins. Let me put it to you this way, I have a fully built Miata set up for the track and if...- DaveLaz
- Post #21
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
Unless the belltechs are filled with concrete, I highly doubt that’s the problem. The ride is unbearable honestly. And I don’t mind switching to Bilsteins in the future after I get it in a much better state.- DaveLaz
- Post #18
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
I found a TSB on body mount insulators so I’ll be replacing those as soon as those come in. I’ll also be re-indexing the torsion bars as I noticed they are rotated counter-clockwise by one hex. If either of these don’t work I’ll be replacing the LCAs as a last resort. I appreciate your feedback...- DaveLaz
- Post #17
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
Hey guys, quick update. I haven’t greased the sway bar mounts yet however I did unbolt the end links just to see how the susp would react to no sway bar at all. The harsh ride and clunk when taking off reduced however did not go away. I’ll be greasing up the mounts later and reattaching the...- DaveLaz
- Post #13
- Forum: Street Suspension
-
-
Horrible noises and ride, HELP!
Ok so if I’m unbolting the D bushings should I just replace them while they’re off anyways? and then pack them with grease? I’ll check motor mounts tomorrow and report back- DaveLaz
- Post #10
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
Hey guys thank you SO much for all the help so far. I went ahead and got lubricant and sprayed the D bushings holding the sway bar to the frame and unfortunately I don’t feel a difference. Maybe the lube needs to settle in more? I went ahead while I was at the store and bought new bushings so...- DaveLaz
- Post #8
- Forum: Street Suspension
-
Horrible noises and ride, HELP!
Hi guys, I lowered my 2006 Yukon SLT 4WD on a crown suspension 2/4 kit that included spindles, rear coils, and shock extenders. I also installed DJM rear trailing arm relocators, proper sway bar end links, and belltech 9513 street performance shocks. When tearing it down I basically had to cut...- DaveLaz
- Thread
- Replies: 38
- Forum: Street Suspension
