The DDMs may have fit in the high beams, but the housing is very tight and I didn’t want to risk the DDMs not fitting. I had a pair of old underground lighting LEDs I tried to fit in the high beams, but the little puck or module that is attached to the bulbs wouldn’t squeeze into the housing...
After putting the bulb in the housing and twisting into position the blade was not vertical…it was probably 5° off vertical. So I had to loosen and adjust the blade. They’re the 6000k.
Wow! These things are like the Sun! Did a bunch of other LED upgrades and decided to do these while I was at it.
Seriously, I was walking out of the store at night the other day and hit the unlock button to see the reverse lights and they about blinded me.
These are the Diode Dynamics XPR...
I picked up two different types of PSX26W 3000k fogs for my 2019 Yukon XL SLT. A 3-sided version and blade version. I went with the blades as I feel the others would have too much glare and there was no cutoff with them, but the blade was not as many lumens as the 3-sided.
I originally ordered...
New to me 2019 Yukon XL SLT with halogen projectors was in desperate need of upgrades to the halogen high beams. I had an older pair of Underground Lighting LEDs that I didn’t use in my Ram because they were too bulky for the housing…well, they were too bulky for the Tahoe housing as well. I...
New to me 2019 Yukon XL SLT with halogen projectors was in desperate need of upgrades to the halogen low beams. Researched some different options and these DDM Tuning LEDs had a good following. I avoided any LEDs that had marketing spelled in broken English lol. Just didn’t feel right paying...
Installed the VLED micro extreme the other day they work great Side by side is of DDM tuning in both low beams, stock in the right high beam, and VLED micro extreme in the left high beam.
Thanks! I was scouring forum posts after I made this post and think I may have seen another post you made about this light. It looks good and doesn’t have the big module attached like other LEDs I’ve seen. I ordered a pair for my Ram and the Yukon which are arriving today. Looking forward to...
I wasn’t even able to screw the bulb into the hole. The problem was the black module (I don’t know if it’s a decoder or what but it’s inline between the connector to the Yukon wiring and the bulb itself) is too bulky. It won’t slip past the connecting collar into the housing so I can connect the...
Hi All,
I just installed a pair of DDM tuning low beams and they work great in the projectors!
I had a pair of 9005 LEDs (for the high beam) from Underground Lighting that didn’t fit inside the housing of my Ram, so I tried to use them today on our Yukon XL. The module WILL NOT fit inside that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.