-
-
TTJ Baker replied to the thread Heater blowing cold air drivers side.Is there still a clicking in the dash? If yes then it is not the control module. Modules don't click.
-
TTJ Baker replied to the thread Shift motor wont line up.I agree in that an inexpensive "code reader" is unlikely to read much beyond the usual engine and emissions systems related codes. An...
-
TTJ Baker replied to the thread HVAC control unit rebuilder?.Just curious here.... Is there a proven issue with the HVAC control?
-
TTJ Baker replied to the thread battery light won’t turn off when turn not running.Is the light on at full brightness or just dimly lit when key is out?
-
TTJ Baker replied to the thread Shift motor wont line up.Depending on what your "cheap OBD" device is you 'may' be able to read any or all codes in the vehicle. It's all in the choice of app...
-
TTJ Baker replied to the thread How does the alarm system work?.What are your available resources? Any sort of scanner/scantool/obd2 dongle? What sort of things were going wrong in the drivers door...
-
TGotta get the codes and see the failure records.
-
TTJ Baker replied to the thread 2001 Yukon Paskey Reset problem.This is guaranteed to fail as it will produce an invalid Passlock Data voltage.
-
TAll good suggestions so far. Watch for traces of coolant from the water pump weep hole, as well as the plastic tees on the firewall...
-
TTJ Baker reacted to Fless's post in the thread 2005 starter wiring diagram/schematic - SOLVED with
Like.
Diagrams at www.charm.li... -
TTJ Baker replied to the thread P0300 code on 2004 GMC Yukon XL Denali - 119,000 miles.Does not require much. I get this (and far more) for under $20 with a Veepeak OBD2 adapter and the Car Scanner ELM OBD app.
-
-
TTJ Baker replied to the thread Help Troubleshooting Fuel Trims.Maybe so, but an hour of driving in one fuel trim cell is not what you are going to read at idle later in a different fuel trim cell. I...
-
TTJ Baker replied to the thread Help Troubleshooting Fuel Trims.Are you able to read which long term fuel trim cells are at that 25%
-
TTJ Baker replied to the thread Help blower motor.@jamison2021 Look here at the upper right of schematic #2. The BLOWER fuse in the underhood fuse block is for fan speed 5 ONLY...
-
TTJ Baker replied to the thread Are the locks the same?.Mechanic friend of mine years ago said to put in something that doesn't kill the fuel pump until like 5 or 10 minutes later. This way...
-
-
Loading…
-
Loading…
