T
Tataocb
Latest activity Postings About
-
-
TTataocb replied to the thread 4L60e issues after rebuild.I decided I would continue with the reassembly since the other 2 drum and pump assemblies had similar results. When I got to the point...
-
TTataocb replied to the thread 4L60e issues after rebuild.I did perform that test and there were no bubbles. I am now testing it after having rebuilt both input and reverse drums as well as the...
-
TTataocb replied to the thread 4L60e issues after rebuild.I was doing an air check with the test plate with only the valve body off. I ended up taking it all apart. When I air checked just the...
-
TTataocb replied to the thread 4L60e issues after rebuild.@NickTransmissions - I come to you again for help. I am disassembling a core. I always air check even during disassembly to see if...
-
TTataocb replied to the thread 4L60e issues after rebuild.I took a look but did not see anything out of the ordinary. Some are a little dirty, but that is about it, no cracks or anything like...
-
TTataocb replied to the thread 4L60e issues after rebuild.@NickTransmissions - it dies look like JBWeld, I will give that a try before discarding the case and just keeping everything else for...
-
-
TLol, yea ive seen some wild stuff over the years...is that JB Weld? If so and the capusle is missing (and if you feel like saving the...
-
TTataocb replied to the thread 4L60e issues after rebuild.Thanks again for the explanation. I bought a pressure gauge from Amazon, but the hose is too short I think to be able to get it in the...
-
-
TTataocb replied to the thread 4L60e issues after rebuild.@NickTransmissions - Thanks for such a prompt reply! You are beyond awesome, hats off to you! Back to the issue, I always set the case...
-
TTataocb replied to the thread 4L60e issues after rebuild.@NickTransmissions - I come to you again hoping you can share your knowledge with another issue. I rebuilt a transmission (new...
-
TConfirm the 2008 case isn't a late year case for the 09 model year, which saw a slew of changes that would make it completely...
-
TTataocb replied to the thread 4L60e issues after rebuild.This is how I ended up resolving the issues: Transmission A - The stator shaft was worn out on the inside where the reverse drum goes...
-
-
Loading…
-
Loading…
