I went a different direction with this issue, I bought new leather seat covers, and seat bottom foam from The Seat Shop, then bought OE GM back foam. I did this back in March 2021, and the seats are as comfy as any truck seat I've sat in, and are holding up great. We have over 60k on the truck...
The more I've read, the more convinced I am that you hit exactly what happened. I'm going to tear it apart and check on the lifter this weekend. Thanks for the nudge in the right direction!
My local fairly trusted shop did the plugs and wires. iirc. Delco plugs, per their recommendation.
I haven't pulled the new plug, and I didn't see the old ones, but it didn't alarm them.
This went from no check engine light directly to flashing CE and stabilitrack and traction control lights...
Greetings!
Started out with a P0306 code (cylinder 6 misfire), swapped in a new coil, cleared the code, it came right back. Runs rough at idle, but OK (though down on power) at speed.
Swapped 4 and 6's wires, and the code turned into P0300 multiple cylinders misfire. Bought a new set of...
https://www.powerstream.com/battery-isolator/
I went with this one. The current carrying is pretty good and I like that it's a mechanical contactor rather than mosfets. It does make a clunk when connecting or disconnecting.
WOLFBOX 12“ Mirror Dash Cam Backup Camera from Amazon. I'm not sure if they're still selling the model I got. I ordered a second one a few months after for my other vehicle and the camera is different.
I just moved it over, and set it up the same way I found it. The Seat Shop's cover had the panel to wrap around the airbag. Plugged it in, and no airbag light. I didn't have any difficulty about airbags.
Yes! Also replaced the foam with their high density foam on the seat bottom, and OEM foam on the seat back Did the upholstery ourselves. Thank you for the kind words!
https://nenno-products.com/
That's the center console I used. I built a little wood bracket that I bolted to the front of the console to hold the ic-7300 at a good angle.
Here's a photo while I was working on the seat install. Shows a decent profile of the Nenno console, and the bracket I...
None of the radio wiring was left. There was 4 holes in the roof, all plugged with a plastic plug and some kind of adhesive.
GM bonded the vehicle, including a big fat braided ground from the engine to the chassis. The supplemental manual describes the wiring, and the bonding.
I'm currently...
Thanks for the kind words! I have operated mobile with the capacity hat on, though I no longer leave it on most of the time. Most of my operating is stationary from parks. We participate in Parks on the Air. I am decent at CW, but rarely call CQ. Mostly return others CQ, or operate in contests...
2014 SSV, has the common hole worn under the pedals. Had a flood in the passenger footwell from the AC drain being clogged.
While drying it out, I'm considering replacing the vinyl floor, and doing a sound absorbing install.
I found two part numbers, with a fairly significant price...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.