-
-
SStarkworks reacted to NickTransmissions's post in the thread Fixed:Everyone’s fav topic: 6l80 issues with
Like.
You're welcome! Glad you got it back together and running again, man. The TEHCM will eventually relearn itself and adjust to your... -
SStarkworks replied to the thread Fixed:Everyone’s fav topic: 6l80 issues.@NickTransmissions - I pulled everything apart initially not knowing what was looking for. When I reassembled, I installed the plastic...
-
SStarkworks replied to the thread Fixed:Everyone’s fav topic: 6l80 issues.@NickTransmissions - I think I may have found the issue. The low reverse sprag spins clockwise and locks counter clockwise.
-
SStarkworks reacted to usaf27's post in the thread Fixed:Everyone’s fav topic: 6l80 issues with Like.
Don’t give up. I have faith in you!
-
SStarkworks replied to the thread Fixed:Everyone’s fav topic: 6l80 issues.@NickTransmissions Well, tore into back into it. New tehcm and valve body from street smart. New bell housing and pump from GM. Still...
-
SStarkworks replied to the thread Fixed:Everyone’s fav topic: 6l80 issues.@NickTransmissions just to make sure I am still going down the right path. The rotor clearance being the way it is now. Could that be...
-
SStarkworks reacted to NickTransmissions's post in the thread Fixed:Everyone’s fav topic: 6l80 issues with Like.
.004 is over twice the max specified clearance (.0015-.002). Have the pump machined to obtain proper clearance or look for a thicker...
-
SStarkworks replied to the thread Fixed:Everyone’s fav topic: 6l80 issues.@NickTransmissions Rotor to deck is 0.004. Just sits below the slide. Could the bushing be just bit low?see pic. 2-6 has about 0.050...
-
-
SStarkworks reacted to NickTransmissions's post in the thread Fixed:Everyone’s fav topic: 6l80 issues with Like.
@starworks, Confirm the rotor-deck is .004? If so, it's high; needs to be .002 max. Measure the 2-6 clutch with a dial indicator...
-
SStarkworks replied to the thread Fixed:Everyone’s fav topic: 6l80 issues.@NickTransmissions. I contacted Autel on 1/22. They said the device I have should have the fast learn ability. Tech had to escalate to...
-
-
-
Loading…
-
Loading…
Forum statistics
Latest posts
-
-
-
2006 Yukon XL 2500 6.0L dies/stutters at cruising speed randomly- Latest: rockola1971
-
2003 Yukon clunking from rear when both tires off the ground
- Latest: rockola1971
-