Recent content by SmileB44Death

  1. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    [SOLVED] Issue was the DOD connector power wire was grounding off of the engine
  2. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Update So I found a used OEM AcDelco MAF from a 2010 Denali installed it and had the same results as my original one. Where it would start and immediately die. That being said here’s were I stand. 1. Original OEM MAF starts and dies 2. Duralast MAF has rough starts, stutters, but will run 3...
  3. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    I changed the maf sensor and cleaned the throttle body.
  4. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Honestly didn’t notice anything different tried unplugging it and seeing if it would do that and it still did. I’m going to try to reinstall the throttle body and intake tube. If that doesn’t work I will unfortunately just take it to the shop. I needed a retune anyways…
  5. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    It should be I didn’t tune it a shop did it’s been cammed for like 10 months didn’t have any issues
  6. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Got it thanks I’ll start on that. But if I were to unplug the maf and the jerking stops that must mean it’s a maf issue right
  7. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    I forgot to mention I got the vvt deleted about 10 months ago
  8. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Man I need that tech 2 huh
  9. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    It was deleted about 8 months ago I tried duralast but after criticism I returned that and put a Delphi on it
  10. SmileB44Death

    Intermittent Drivability Issues

    What was the issue?
  11. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Hello, Last weekend my truck decided to run but shortly after die. No codes were present so I had a guy bring his scanner and it appeared the MAF sensor was bad. So I went ahead and cleaned my throttle body replaced the MAF sensor with a Delphi one and while the battery was disconnected let it...
  12. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    Update: I replaced my rear suspension with Bilstein 5100 and it helped but I believe the issue was with the cheap Chinese tires I had on. Awhile back I got a flat and put on a used tire that matched my other tires but had different date and ply. 2 weeks ago I got all new tires and she’s back to...
  13. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    For the front I have the oem and replaced my rears with Bilstein 5100 2 weeks ago
  14. SmileB44Death

    Rear Main

    Is this a good converter for a cammed 6.2?
Back
Top