Search results

  1. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    [SOLVED] Issue was the DOD connector power wire was grounding off of the engine
  2. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Update So I found a used OEM AcDelco MAF from a 2010 Denali installed it and had the same results as my original one. Where it would start and immediately die. That being said here’s were I stand. 1. Original OEM MAF starts and dies 2. Duralast MAF has rough starts, stutters, but will run 3...
  3. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    I changed the maf sensor and cleaned the throttle body.
  4. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Honestly didn’t notice anything different tried unplugging it and seeing if it would do that and it still did. I’m going to try to reinstall the throttle body and intake tube. If that doesn’t work I will unfortunately just take it to the shop. I needed a retune anyways…
  5. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    It should be I didn’t tune it a shop did it’s been cammed for like 10 months didn’t have any issues
  6. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Got it thanks I’ll start on that. But if I were to unplug the maf and the jerking stops that must mean it’s a maf issue right
  7. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    I forgot to mention I got the vvt deleted about 10 months ago
  8. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Man I need that tech 2 huh
  9. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    It was deleted about 8 months ago I tried duralast but after criticism I returned that and put a Delphi on it
  10. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Yeah I will thanks
  11. SmileB44Death

    Intermittent Drivability Issues

    What was the issue?
  12. SmileB44Death

    [SOLVED] 6.2L stutters/jerks while accelerating

    Hello, Last weekend my truck decided to run but shortly after die. No codes were present so I had a guy bring his scanner and it appeared the MAF sensor was bad. So I went ahead and cleaned my throttle body replaced the MAF sensor with a Delphi one and while the battery was disconnected let it...
  13. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    Update: I replaced my rear suspension with Bilstein 5100 and it helped but I believe the issue was with the cheap Chinese tires I had on. Awhile back I got a flat and put on a used tire that matched my other tires but had different date and ply. 2 weeks ago I got all new tires and she’s back to...
  14. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    For the front I have the oem and replaced my rears with Bilstein 5100 2 weeks ago
  15. SmileB44Death

    Rear Main

    Is this a good converter for a cammed 6.2?
  16. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    looks like I might’ve overtorqued my sway bar endlink when I put it on 8 months ago. I’m unsure if this can cause my issue but I don’t recall it doing that awhile back. Only started noticing it when damn near all my shocks started to go out.
  17. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    2012 and 160k*
  18. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    Yeah I need to update it
  19. SmileB44Death

    MagnaRide Z95 fixed 2011 Escalade - gratitude thx

    I saw so many issues with people not getting oem shocks so I decided to just get oem and now it rides so smooth. I need to get the rears done though or maybe a new compressor. How did you calibrated it? What’s the pros of getting it calibrated?
  20. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    Does a OB2 read the “Service Suspension” or would I need a better scanner?
  21. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    Gotchu thanks
  22. SmileB44Death

    [SOLVED] Escalade Swaying at high speeds

    Hello, If I go over 90 mph, my Escalade starts to sway left and right. I believe this issue began when both my front driver-side and passenger-side struts blew out. However, after replacing them, the sway is still present—just a bit less noticeable. Also, after replacing the two front struts...
  23. SmileB44Death

    Y pipe fitment issues

    I ended up just getting a hangar welded to it no issues since thanks guys!
  24. SmileB44Death

    Y pipe fitment issues

    Hello, Recently got some long tube headers installed however after a few weeks. The y pipe is hitting the transmission crossmember. Any suggestions on how to get more clearance without replacing the motor/transmission mount?
  25. SmileB44Death

    What Cam Should I pick

    Hello thanks, it will have btr ls7 lifters, high pressure oil pump, and long tube headers. Currently on 33s but looking to go back to stock tires. Also looking for the chop really more than the gains because the truck is heavy anyways. Also will not be doing towing just a daily

Forum statistics

Threads
137,671
Posts
1,989,105
Members
102,675
Latest member
j_jerry79

Latest posts

Back
Top