S
shorelocal
Latest activity Postings About
-
-
Sshorelocal replied to the thread Wheel spacers ... what's the minimum number of turns on the lugs?.After some additional research, the GM wheel studs have a M14 x 1.5 mm pitch to them, which means each "turn" would travel 1.5mm. The...
-
Sshorelocal reacted to mattbta's post in the thread Wheel spacers ... what's the minimum number of turns on the lugs? with
Like.
Did you grind down the "bump" on the new calipers... -
Sshorelocal reacted to gooffeyguy's post in the thread Wheel spacers ... what's the minimum number of turns on the lugs? with Like.
I don't know how many "turns" is required or considered safe for the street, but I do know that NHRA and IHRA rules for track cars...
-
Sshorelocal replied to the thread Wheel spacers ... what's the minimum number of turns on the lugs?.Thanks @gooffeyguy ... this is definitely useful information. I'll slap the spacers on and measure them out with the wheel installed...
-
Sshorelocal replied to the thread Wheel spacers ... what's the minimum number of turns on the lugs?.No, I didn't need to since it wasn't the bump that was rubbing on the wheel. It was the bottom of the caliper edge, not the raised...
-
Sshorelocal posted the thread Wheel spacers ... what's the minimum number of turns on the lugs? in Exterior.I have an 06 Escalade AWD and I'm running a set of 2018 Escalade OEM 22's (285/45R22) ... I've also upgraded the front brakes to the...
-
Sshorelocal replied to the thread Deleting Z55 - 2006 Escalade.Not sure it's mandatory, but the factory springs are apparently too soft with the replacement shocks, so the Bilstein kit I bought...
-
Sshorelocal replied to the thread Deleting Z55 - 2006 Escalade.Hey @outoforder ... I didn't look at other options besides the Bilsteins. I've installed them now, both fronts and rears (with rear...
-
-
Loading…
-
Loading…
