opfor2's latest activity
-
opfor2 replied to the thread Cold Starting issue.The sensor next to the power steering pump -
opfor2 replied to the thread Cold Starting issue.I did the relearn with my bi-directional code reader so I don't think that's the issue for the truck idles fine once warmed up. I...
-
It it's not one thing it's another!!!! I had a few extra $$ to play with so I replaced the Throttle body assembly w/ Genuine GM...
-
I just wanted to update everyone on this. I finally got it to a different mechanic and he blew out all of the lines and that fixed the...
-
I would maybe get a second opinion. It sounds like you either have a purge valve stuck closed, or the charcoal canister took a dump and...
-
Welcome to the board! Nice looking Tahoe, share some interior pics when you get a chance. I too have really high hours, I don't recall...
-
Gina, It is not true that both mounts need to be replaced on small block GM motors if the left one breaks. Unlike Mazdas (which I also...
-
don't mean to be a downer, but the cluster was probably replaced and the truck itself probably has more than 12k miles. If you don't...
-
Did you find that tape measure in the surplus vehicle? If so it's probably garbage, those use fuzzy math. I'd go grab one from a big box...
-
opfor2 reacted to CruelJung's post in the thread Rough Idle @ Cold Crank (Worse in Cold Weather) + Fluctuating RPM in Drive with
Like.
SOLVED - Engine Coolant Temperature Sensor It's that rare time of year in my state, when the weather dips into cooler temperatures... -
opfor2 replied to the thread Rough Idle @ Cold Crank (Worse in Cold Weather) + Fluctuating RPM in Drive.deleted
-
well first thing is you want to do is use a scanner that can read SRS and you want to scan it while the light/warning is on/active other...
-
opfor2 replied to the thread Rough idel issue.Exclusively E85
-
opfor2 replied to the thread Rough idel issue.the TB was also removed and cleaned about 9 months ago. I also did a relearn upon reinstallation. And yes we were in a closed loop...
-
opfor2 replied to the thread Rough idel issue.No I just listened to the idle and I did not notice anything. The plugs and wires were replaced about 9 months ago using ACDelco...
