M

Mrwick_02

TYF Newbie From Texas
Joined
Last seen
Posts
29
Reaction score
35
Points
13

Latest activity Postings About

    • M
      Mrwick_02 replied to the thread Transmission cooler line(s) bracket.
      I may try to bend them to fit an lines... Don't know why I didn't think of that. Thanks.
    • M
      Mrwick_02 reacted to swathdiver's post in the thread Transmission cooler line(s) bracket with Like Like.
      Bend that one to fit them or use two tie straps for each one, through those holes in the upper portion and cut the lower portion away.
    • M
      Mrwick_02 replied to the thread Transmission cooler line(s) bracket.
      Kind of, but this bracket is metal and bolts to the side of the oil pan... Trying to find one that bolts up the same but for an lines.
    • M
      Mrwick_02 reacted to Doubeleive's post in the thread Transmission cooler line(s) bracket with Like Like.
      I do not personally know but it's just pot metal or aluminum wouldn't be hard at all to just make something a vice and drill and saw are...
    • M
      Mrwick_02 posted the thread Transmission cooler line(s) bracket in Engine & Drivetrain.
      Is there a bracket out there that bolts up the same for -6an tranny cooler lines? Really wanting to keep them securd the same way.
      • 1000021723.jpg
    • M
      Mrwick_02 reacted to Mudsport96's post in the thread Good cam? with Like Like.
      Byr no springs required cam Tsp cam The graphs look different because of the rpm increments they use are different. Just look up...
    • M
      Mrwick_02 replied to the thread Good cam?.
      Would a chopacabra cam suffice?... That's the cam I originally had in mind before I even started the project.
    • M
      Mrwick_02 reacted to Mudsport96's post in the thread Good cam? with Like Like.
      Truck Norris cam. More average power through the whole range and only giving up power at the very top of the rpm range. In a heavy...
    • M
      Mrwick_02 replied to the thread Good cam?.
      More usable power, racing, donuts/burnouts. Will be mostly daily driven, but I do race and do donuts/burnouts usually about twice a week.
    • M
      Mrwick_02 reacted to Mudsport96's post in the thread Good cam? with Like Like.
      What are your plans for the vehicle? Towing? Racing? Just more usable power?
    • M
      Mrwick_02 replied to the thread Good cam?.
      If it means anything, I've done some research and a sloppy stage 2 cam seems like a pretty decent cam but wanting to hear what others...
    • M
      Mrwick_02 replied to the thread Good cam?.
      Sorry for the late response... Going with ls7 lifters, tsp chromoly pushrods, ams performance stock rocker arms with upgrade bushings...
    • M
      Mrwick_02 reacted to Marky Dissod's post in the thread Good cam? with Like Like.
      The answer to this question really depends on how you are willing to prepare the rest of the valvetrain.
    • M
      Mrwick_02 replied to the thread Good cam?.
      Sorry for the super late response... Preferably 400-420 whp.
    • M
      Mrwick_02 reacted to Mudsport96's post in the thread Good cam? with Like Like.
      Are you talking 400 wheel or 400 crank? With just long tubes and a good tune a stock LQ4 should be close to 400 crank. How to make...
    Show older items
  • Loading…
  • Loading…

Forum statistics

Threads
130,571
Posts
1,834,904
Members
94,235
Latest member
asadachi99

Latest posts

Top