mikez71's latest activity
-
So been awhile but I got an update. After teaching myself how to weld I installed an entire new exhaust system to replace the old one... -
mikez71 replied to the thread Oil cooler line & trans cooler line replacement.There is another separate line from radiator to cooler. Technically 3 lines, but two part numbers.
-
mikez71 replied to the thread Cooling fan circuit on 6.2L.I assumed they were, but now that you mention it, my settings say 'discrete' so I am probably wrong about the PWM.. I thought my AC fan...
-
Well, another continuation of the last update. It has been acting absolutely perfect the last several times we have driven it...
-
mikez71 reacted to Dirty looks's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with
Haha.
So walking off in disgust and drinking a bloody Mary while eating pizza fixes all your problems. Mysterious the fan works now. Wtf.. -
And losing all 'give' [impact absorption]. I don't necessarily see that as a benefit. joe
-
mikez71 reacted to OR VietVet's post in the thread A/C belt and tensioner failed. Should I also replace serpentine belt and tensioner? with Haha.
When in the belt(s), tensioner(s) and idler(s) remove mode, do it all. Hell, get a good look at the water pump and do it if there is...
-
mikez71 reacted to homesick's post in the thread A/C belt and tensioner failed. Should I also replace serpentine belt and tensioner? with Like.
You got me curious. I discovered I have KW1, 160 amp. Woohoo. joe
-
mikez71 reacted to Fless's post in the thread A/C belt and tensioner failed. Should I also replace serpentine belt and tensioner? with Like.
If you don't know when the main serp belt and tensioner were last changed, it would be a good idea to replace them. Does the main belt...
-
I use mine as a tool shelf when working under the hood and checking fluids and such. As something to grab onto when climbing up out from...
-
Trick is to make contact as gently as possible, to push, not to bump or hit. Always thought that more rubber & less steel would improve...
-
mikez71 reacted to yoda009's post in the thread 13 suburban cammed misfire vac leak??? - SOLVED with Sad.
Not the issue. Still getting misfire on cyl 7. Did find my intake hose not connected so made rubber connection. Swapped coils and tried...
-
mikez71 replied to the thread Cooling fan circuit on 6.2L.Top left corner, 5 pin control relay on bottom. No amp markings, but rockauto seems to show 35 and 40 amp relays for this style. This...
-
-
That 'controversy' applied - past tense - to Dexron3 & older clutch materials. As would I, with Dexron6 or fully synthetic Mobil 1...
-
What's the color of the fluid? I'd advise a pan drop and filter change. That'll refresh approximately 40% of the fluid with trans...
