Recent content by Jeffdylanproctor

  1. J

    Oil pressure

    Thanks, I was just wondering if anyone thought it had got in the "danger zone" I figured if it was anything it would be the o ring more than the pump itself. I've got all the LS engine tools to get the front balancer off and everything, so might just go ahead and put a Melling 10295 pump in...
  2. J

    Oil pressure

    I had a sudden change in oil pressure, and I'm debating if I should put a new oil pump in. The truck was running at about 35-42 psi until about a month ago when it dropped to about 25-35. When completely up to temperature, It cruises at about 30-35 psi, under acceleration it jumps almost to 40...
  3. J

    Driver side blowing hot, where am I going wrong?

    I fashioned this plate onto the blend door and it seems to be solid, so I plan on reassembling the truck now and hopefully it will work right
  4. J

    Driver side blowing hot, where am I going wrong?

    Alright, so yeah, your worst nightmare can happen with these. It may not be an actuator, it may be the actual blend door. After getting the heater box out and dissasembled, the blend door was clearly snapped, with nothing but the foam strip holding the the pieces of plastic together, leaving it...
  5. J

    Driver side blowing hot, where am I going wrong?

    Ok so this is gonna be a nightmare for someone in the future when they search this problem and end up on this page...but... The actual door inside my heater box is snapped. Wow. When twisting the rod that connects to the actuator, I could hear something when going one direction, and after...
  6. J

    Driver side blowing hot, where am I going wrong?

    Ok, so I got up early this morning to work on it again, and I hate to sound crazy, but I am starting to be convinced something is off inside the HVAC box itself. I have three different actuators, and all move when turning the dial, all go through the recalibrate cycle, but the only two temp...
  7. J

    Driver side blowing hot, where am I going wrong?

    Does anyone know the best position for the actuator to be in when installing? I thought I read they needed to be opened and the position manually set, especially if they aren't AC Delco
  8. J

    Driver side blowing hot, where am I going wrong?

    I recently picked up a 2005 Escalade EXT (in addition to my 2004 Escalde and wife's 2011 Escalade) to use around the farm and I can't seem to get the driver side to blow cold air, and it is absolutely cookin in Tennessee right now. I was told the truck hadn't had working air for about six...
  9. J

    Ideas? Help with a DOD/ AFM Deleted 2011 Escalade 6.2

    I tried to find a part number on the exploded tensioner, but couldn't find any. You can see where the non-moving guide was being absolutely eat up by the timing chain though. I am very happy with finding this problem and it runs so good now. I would imagine the factory tensioner to have some...
  10. J

    Ideas? Help with a DOD/ AFM Deleted 2011 Escalade 6.2

    Gentlemen: I believe the problem has been found and solved, and the Good Lord has had great mercy on me that the truck didn't detonate before I fixed it. The timing chain tensioner was completely obliterated, and the cam was able to flop all over the place. It is amazing how easy these LS...
  11. J

    Ideas? Help with a DOD/ AFM Deleted 2011 Escalade 6.2

    also the truck has never had anything visual on the dash to indicate v4 mode, and I have been meticulously looking for somewhere that might show it
  12. J

    Ideas? Help with a DOD/ AFM Deleted 2011 Escalade 6.2

    What is the best /easiest way to get the PWM disabled so the trans and torque converter work a little better?
  13. J

    Ideas? Help with a DOD/ AFM Deleted 2011 Escalade 6.2

    ok so I am back from our honeymoon and got back to working on the Escalade. I thought the DOD disabling dongle had fixed the problem, but I guess not, but I was going to put a new Cam Solenoid in it anyways to see if that was the problem. First thing I noticed after popping off the water pump...
  14. J

    Can You Put a 4wd Front Differential in a AWD Model?

    Awesome, I guess I'll give it a shot
  15. J

    Can You Put a 4wd Front Differential in a AWD Model?

    Can you put a 4wd Front Differential in a AWD model? I have a 2004 Escalade 6.0 AWD and I was driving it home on a 13 hour trip in 98F weather and coming down a mountain my front differential overheated, blew a bunch of fluid out, and..well... now it leaks really badly and you can hear the...
See more

Forum statistics

Threads
138,049
Posts
1,997,874
Members
102,989
Latest member
justinakay79

Latest posts

Back
Top