-
-
DPulled the trigger on a local 2007 Denali yesterday. 1-owner, no accidents, 144K miles. Husband was a mechanic, and manic about this...
-
DDenali GMC 87 reacted to rdezs's post in the thread Valvoline Restore & Protect experiment with
Like.
Here's the VLOM plate.... You can see the clean areas where apparently it was leaking. -
DDenali GMC 87 reacted to rdezs's post in the thread Valvoline Restore & Protect experiment with Like.
One final thought in this teardown following the Valvoline, I did notice the underside of the VLOM play have that golden hue that is...
-
DDenali GMC 87 reacted to j91z28d1's post in the thread Valvoline Restore & Protect experiment with Like.
I personally have never noticed an engine have zero leaks, switch to synthetic and it start leaking. but if an ls oil pan isn't leaking...
-
DDenali GMC 87 reacted to Tonyrodz's post in the thread Valvoline Restore & Protect experiment with Like.
Is this it?
-
DDenali GMC 87 reacted to rdezs's post in the thread Valvoline Restore & Protect experiment with Like.
Opened up the pressure relief valve in the OEM oil pump. No accumulated debris of any kind. I expected to find at least a little bit of...
-
DDenali GMC 87 reacted to Rocket Man's post in the thread Valvoline Restore & Protect experiment with Like.
I used those and then second engine I couldn’t find them so I used hardwood dowels. :thumbsup:
-
DDenali GMC 87 reacted to rdezs's post in the thread Valvoline Restore & Protect experiment with Like.
5/16 stainless steel rod is what I use
-
DDenali GMC 87 reacted to j91z28d1's post in the thread Valvoline Restore & Protect experiment with Like.
as long as you can run use the lifters. I remember a dowl trick.
-
DDenali GMC 87 reacted to Rocket Man's post in the thread Valvoline Restore & Protect experiment with Like.
I installed a Whipple blower on my 02 6.0 in my driveway, and then later swapped the cam without pulling the blower or heads. Every shop...
-
DDenali GMC 87 reacted to j91z28d1's post in the thread Valvoline Restore & Protect experiment with Like.
I don't even have that kinda room in my shop at work. but then again, we would never do this work. it would be engine swapped or...
-
DDenali GMC 87 reacted to rdezs's post in the thread Valvoline Restore & Protect experiment with Like.
Anyone looking to delete the AFM on a 6.2, below is a photo of the correct L92 OEM camshaft that retains VVT if you're looking to...
-
DDenali GMC 87 reacted to rdezs's post in the thread Valvoline Restore & Protect experiment with Like.
The push rods, the lower half have residue on them. Nothing extreme, but not as clean as the oil pan and the top of the heads
-
DDenali GMC 87 reacted to rdezs's post in the thread Valvoline Restore & Protect experiment with Like.
The real estate I was referring to and trying to keep organized for an AFM delete: Clearly do not use your wife's kitchen countertops...
-
DDenali GMC 87 reacted to Tonyrodz's post in the thread Valvoline Restore & Protect experiment with Like.
Do you think the loosened sludge could gum up other internal areas? Like oil passages, push rods oil pump, oil pump pick up screen etc...
-
-
Loading…
-
Loading…
