builds4christ's latest activity

  • builds4christ
    builds4christ reacted to LsHart's post in the thread Running lean with Like Like.
    Is it programed (tuned)? And when did this start? After new add on? And to add, if computer is showing lean then that means it's...
  • builds4christ
    builds4christ replied to the thread Running lean.
    All right guys, here's an update. It thew the same codes as before for the O2 sensors. I drove it around a little bit while trying to...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Gotcha, mine isn't a flex fuel car as far as I can tell. Cleaned the throttle body yesterday. Gonna give it a day or so of driving to...
  • builds4christ
    builds4christ reacted to Fless's post in the thread Running lean with Like Like.
    There are various mixes of ethanol in pump gas. One can find ethanol-free, E10 (up to 10% ethanol), E15 (up to 15% ethanol), etc. E85...
  • builds4christ
    builds4christ replied to the thread Running lean.
    I couldn't tell you on the injectors, unfortunately. I have to check into this kit they installed. There was some janky stuff going on...
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    Do you have long tube headers? Because I heard that can mess with O2 readings.. And because it's a modded/supercharged setup, I wonder...
  • builds4christ
    builds4christ replied to the thread Running lean.
    I can check that. My scanner is pretty good. It's the Topdon Phoenix Lite 2. What will alcohol tell me? I've never heard of this before...
  • builds4christ
    builds4christ reacted to Fless's post in the thread Running lean with Like Like.
    An advanced scanner can read what the ECU is calculating for alcohol.
  • builds4christ
    builds4christ reacted to OR VietVet's post in the thread Running lean with Like Like.
    Maybe the cats are not as efficient as should be and the downstream O2 is picking that up. Or, how old are the cats?
  • builds4christ
    builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
    Possible the MAF is no good? I had that issue in my gen3, and cleaning the MAF with MAF spray cleaner did nothing. Fuel trims were 15%...
  • builds4christ
    builds4christ replied to the thread Running lean.
    Thanks for the reply! I would guess a week or two. It runs on 93 octane. I tried resetting o2s and trim data, but it didn't seem to...
  • builds4christ
    builds4christ reacted to Fless's post in the thread Running lean with Like Like.
    How long have the LT fuel trims been high? I'd say to try resetting them with a scanner so it can start recalculating. What fuel (E10...
  • builds4christ
    builds4christ posted the thread Running lean in Engine & Drivetrain.
    Hey all, Seem to be posting a lot lately! Got P0133/0153 and P1133/1153 with new 02 sensors and a clean maf. Also running 15-19% LTFT...
  • builds4christ
    builds4christ replied to the thread 6L80 questions.
    Thanks y'all, yeah it's that one.
  • builds4christ
    builds4christ reacted to donjetman's post in the thread 6L80 questions with Like Like.
    Borg Warner BW4485 if your glove box rpo code is NR3?
Show older items

Forum statistics

Threads
138,087
Posts
1,998,585
Members
103,013
Latest member
GS Audio

Latest posts

Back
Top