builds4christ's latest activity
-
Maybe the cats are not as efficient as should be and the downstream O2 is picking that up. Or, how old are the cats? -
Possible the MAF is no good? I had that issue in my gen3, and cleaning the MAF with MAF spray cleaner did nothing. Fuel trims were 15%...
-
builds4christ replied to the thread Running lean.Thanks for the reply! I would guess a week or two. It runs on 93 octane. I tried resetting o2s and trim data, but it didn't seem to...
-
How long have the LT fuel trims been high? I'd say to try resetting them with a scanner so it can start recalculating. What fuel (E10...
-
Hey all, Seem to be posting a lot lately! Got P0133/0153 and P1133/1153 with new 02 sensors and a clean maf. Also running 15-19% LTFT...
-
builds4christ replied to the thread 6L80 questions.Thanks y'all, yeah it's that one.
-
Borg Warner BW4485 if your glove box rpo code is NR3?
-
Probably a BW44-85
-
Pull it. You could pull it, rebuild it and get it back in, in less than a day.
-
builds4christ replied to the thread 6L80 questions.Yeah all good points. I changed the fluid when I picked up the truck and it seemed very clean. The tranny is another story on the fluid...
-
You should be able to do so but I'd just pull it out all together...Drain the fluid first, note anything unusual in the fluid. If a...
-
builds4christ replied to the thread 6L80 questions.Thanks man, is this doable with it on the vehicle, I wonder? Probably not, but maybe. I gotta ask.
-
Pull the back cover off and check it. Also check for wear in the cover itself. You may end up replacing both chain and cover.
-
builds4christ replied to the thread 6L80 questions.Gotcha, I guess that makes sense. I wonder if there's supposed to be any slop at all. I can't imagine it being perfectly tight, but I'm...
-
builds4christ replied to the thread 6L80 questions.Gotcha, that's a good test! But how much slop is acceptable? All the mounts, including transmission, are new (engine mounts were busted...
