Recent content by 1weasel

  1. 1

    notched camber question

    I ended up paying around $250 for the tabs to be taken out, new camber bolts and plates because previous alignments were done rounded then out, and an alignment.
  2. 1

    mounted 38in tire inside!!!

    I've thought about making a rack for the inside of my 'hoe. Something that would the tire level with the top of the back seat so that I can still use the space underneath the tire but would swing down to be able to get the tire in and out easier.
  3. 1

    Bit the bullet....

    I would like to see how they hold up. I did mine before mounting/balancing them and I'm getting rock chips on them. I also didn't put near as much clear on them as you did.
  4. 1

    question on cranking bars....

    The bars themselves could be sagging too. They are 11 years old.
  5. 1

    running 15" wheels???

    ive got 15's with no spacers. They are 15x7 but I'm not sure of the backspacing, but I had to sand down the corners of the front calibers a bit, but they fit fine
  6. 1

    Started demolding today =) (PICS)

    At least you got a whole side off. Who's gonna see both sides of your vehicle when you're driving down the road! A credit card (preferably not one you need) helps save fingers and gets most of the glue.
  7. 1

    Hmmmmm.... Interesting?!

    its also on FSC. I've been reading through a thread about the differences on the bumper bracket widths. I believe ours is narrower, but it doesn't take much to modify the brackets.
  8. 1

    Custom Rear Bumper

    I would be leary about making my rear bumper an air tank. That could become pretty dangerous if you get rearended or hit a rock on a trail.
  9. 1

    Dirty water stuck behind Bowtie on grill

    Actually, there is. Taking the grill off is easy once you know where all the clips are, just be careful, the clips are as old as your truck. Then, the bowtie is held on by 2 of those speed nuts. Getting the two pieces seperated is kind of tricky, I got it done by prying on it SLOWLY with a...
  10. 1

    Dirty water stuck behind Bowtie on grill

    Yep, I took bowtie off then seperated the clear part from the gray backing. There is glue holding them together that pulled some of the gold off, but I was planning on painting the back of the clear black anyway. Maybe take the whole piece off and let it dry out a bit. Rice does wonders for...
  11. 1

    Transmission leak, but no leak.

    Well, it's not leaking into the tcase. I think it just got hot, crappy fluid etc. I'm getting it flushed right now.
  12. 1

    Transmission leak, but no leak.

    How big of a pita is that? I have still yet to have time to put it up on the lift, but the more I think about it, it makes more sense.
  13. 1

    Transmission leak, but no leak.

    Im thinking the seal between the transmission and transfer case is leaking. Im gonna see how full it is and go from there.
  14. 1

    GM 14 bolt rear-end, worth it?

    It's going to be sluggish I went from a 31 to a 33 and noticed a little difference. And I've got 3.73s for now.
  15. 1

    Transmission leak, but no leak.

    The stick was dry when I pulled off. What would cause it to come out the breather tube? At first glance, I thought the breather tube was a cut line and it looked like that's where it was coming out.
See more

Forum statistics

Threads
129,543
Posts
1,817,510
Members
92,772
Latest member
Jandy

Latest posts

Top