qukon 95
Full Access Member
- Joined
- Apr 7, 2011
- Posts
- 556
- Reaction score
- 5
okay fellas as you know i replaced my spider gears in the rear and it didn't solve
the clunk when i come to a full stop and then take off, not punching the pedal i think the rearend will need replacing. this is the second rebuilt rear that i put on
the yukon ? Will a transmission cause these failures ? but im not having any issues with the trans is there some gears in it that has too much play in them?
when i go 55/70 mph i have vibration that coming from front anything under that
i have no vibes . NOTE this didn't happen until after i replace spider gears might be just a coincidence :hmmm2.
could i get a 14 bolt with same gear ratio that will bolt right up?
the clunk when i come to a full stop and then take off, not punching the pedal i think the rearend will need replacing. this is the second rebuilt rear that i put on
the yukon ? Will a transmission cause these failures ? but im not having any issues with the trans is there some gears in it that has too much play in them?
when i go 55/70 mph i have vibration that coming from front anything under that
i have no vibes . NOTE this didn't happen until after i replace spider gears might be just a coincidence :hmmm2.
could i get a 14 bolt with same gear ratio that will bolt right up?