What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[wjburken]

And the right side is done. I had the spring compressed, shock changed, decompressed, and back in place in 30 minutes. The left side took about 2.5 hours.

View attachment 269343

What took so long to replace the strut on the left side?

 

[PG01]

You can get all you need, (ground, constant power, accessory power, or RAP) from the upfitter box just to the left of the brake pedal.

Sent from my SM-G930V using Tapatalk

It’s actually called mbec
Mid bussed electrical center
Just useless fyi

 

[PG01]

Good to know. You by any chance have a pic letting me know which ones to tap into?


Sent from my iPhone using Tapatalk

See above post

 

[Sparksalot]

What took so long to replace the strut on the left side?

First was figuring out how to get it apart. Then I discovered, after the strut was assembled and under tension, that the 3 studs on top are not symmetrically placed. That caused about 45 minutes of trying to lever the bottom end into place and get the bolts started.

there’s definitely a learning curve!

 

[Sparksalot]

All done.

Pinstripes show up well.

 

[Sparksalot]

It’s actually called mbec
Mid bussed electrical center
Just useless fyi

View attachment 269344 View attachment 269345

Cool info!

 

[bigrhino]

Last one lol

View attachment 269340

How long did you have to wait for everything to be done?

 

[gooffeyguy]

Good to know. You by any chance have a pic letting me know which ones to tap into?


Sent from my iPhone using Tapatalk

And 1/8" female spade terminals fit on those pins nicely

Sent from my SM-G930V using Tapatalk

 

[wjburken]

First was figuring out how to get it apart. Then I discovered, after the strut was assembled and under tension, that the 3 studs on top are not symmetrically placed. That caused about 45 minutes of trying to lever the bottom end into place and get the bolts started.

there’s definitely a learning curve!

I was wondering if it was gaining experience on the first side. I ask because I am likely going to be doing this on the wife’s Yukon soon.

 

[osidesurfer365]

It’s actually called mbec
Mid bussed electrical center
Just useless fyi

View attachment 269344 View attachment 269345

Much appreciated


Sent from my iPhone using Tapatalk