What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

eohat

In Torque We Trust
Joined
Nov 14, 2016
Posts
157
Reaction score
277
Location
Mike @ Altitude 5,280 ft.
Did you use that AC Delco clutch kit? And did you do it while still on the motor? Mine is a little noisy and would like to go this route.


I used the Four Seasons clutch kit from RockAuto. The AC Delco clutch kit is $170 and the compressor w/clutch is $213. :shrug: The manufacturers overcharge for the clutch kit because they know it’s more expensive to open the system while replacing the compressor. #NotCool

I did the replacement with the compressor on the motor. Removing the fan shroud made access easier. You can replace just the clutch bearing if your clutch is still in good shape. It’s staked in place but should be easy to press out. I also purchased the bearing separately to replace the noisy one on my Silverado.

Bearing.jpg
Pulley.jpg
 

1992rs

Full Access Member
Joined
May 8, 2015
Posts
287
Reaction score
217
Location
OR
Joe Gibbs ‘hoe alert
667ae337d50e60eb094be38e47417415.jpg
503f251303e511155e26c15ada8423bf.jpg
f98b427059d07ce15f9ca00aa28657b1.jpg
7d3013e1690fc634c1db2e7e68172dfb.jpg
b1cfc5a748e09dde0ed6e9056382be2a.jpg
503f251303e511155e26c15ada8423bf.jpg
97f9b94510cd9513a7bd5ae4f975d8eb.jpg



Sent from my iPhone using Tapatalk
 

1992rs

Full Access Member
Joined
May 8, 2015
Posts
287
Reaction score
217
Location
OR
Pretty sharp. Any idea how many they made and cost? Any interior mods?
I have no clue how many they made, but iirc the Joe Gibbs hoes are the rarest of the models he modded. I totally spaced the interior but again if memory serves me correctly, it received a custom gauge cluster, dash bezel, special material (can’t recall if it’s suede or leather) where the two tone in the seats usually is and on the door cards by the arm rest.

Couple things I noticed, aside from the obvious ground fx:
- Denali rear bumper
- Escalade vents
- 14” rotors on all 4 corners, the fronts being 2 piece
- 305/50/ 20 tires, which were chunky af on top of them already being nitto 420s, which are a little bigger than normal to begin with
- the front grill looks a lil different than normal. It’s rather flat, more like an hd grill.


Sent from my iPhone using Tapatalk
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,582
Reaction score
26,263
Location
Treasure Coast, Florida
I used the Four Seasons clutch kit from RockAuto. The AC Delco clutch kit is $170 and the compressor w/clutch is $213. :shrug: The manufacturers overcharge for the clutch kit because they know it’s more expensive to open the system while replacing the compressor. #NotCool

I did the replacement with the compressor on the motor. Removing the fan shroud made access easier. You can replace just the clutch bearing if your clutch is still in good shape. It’s staked in place but should be easy to press out. I also purchased the bearing separately to replace the noisy one on my Silverado.

View attachment 224360
View attachment 224361

Much obliged! Did you say you needed or used a puller to get the old one off?
 

Forum statistics

Threads
131,990
Posts
1,860,497
Members
96,385
Latest member
BigBee44
Top