stock turn signal mirror swap????

[chacho44]

I just picked up a pair of heated and signal mirrors for my 00 Yukon, question is I have heated only can these be wired in for the turn signals to work they came with the pigtail from the truck they came from. Can this be done, or anyone done this. Links and tips are appreciated. Thanks

 

[01TX_Tahoe]

it can be done. you just have run a couple of wires to through the door boot to the end of each side of the dash. you can find the signal wires there or blinker wires and just tap into them. don't forget to ground the right wire also. if i'm not mistaking i think it should be a brown wire up towards the top of the fuse box on the driver side and pass side. be sure to test first....

 

[chacho44]

now do I have totap into the turn signal wire on the column or can I run it to the turn signal fuse????