Kpwweb
Full Access Member
- Joined
- Dec 11, 2015
- Posts
- 681
- Reaction score
- 285
I really like to look and serviceability of the PML rear diff cover, located here:
http://www.yourcovers.com/diffcover_11129.php
However, looking at and taking measurements, and conversing with the PML factory, it appears there is 0.030" clearance between the rear diff cover fins and the Panhard bar. I'm thinking this is too close and the two will collide?
They can machine down the fins if necessary?
Thoughts on 0.030" clearance?
http://www.yourcovers.com/diffcover_11129.php
However, looking at and taking measurements, and conversing with the PML factory, it appears there is 0.030" clearance between the rear diff cover fins and the Panhard bar. I'm thinking this is too close and the two will collide?
They can machine down the fins if necessary?
Thoughts on 0.030" clearance?
