domer94
Full Access Member
so i had the front wheels off to finally replace a messed up lug stud and notice the brake pads were pretty bad. down to advance i go to get a new set. they went on without a hitch , but when i had everything back together i noticed a puddle of brake fluid under the truck. i pop the hood and noticed fluid was coming from the master cylinder/ brake booster flange area. i did notice the reservior was pressed up with fluid. so i immediatly thought when i used my caliper piston retractor tool , there must have been too much fluid with and it blew a seal. i test drove and the brakes didnt seem to be going down to the floor or anything. am i looking at a master cyl replacement? there was a decent amount of fluid on the ground.
thnks
thnks