Lower ball joints shot

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jerryjoe28

That Guy
Joined
Nov 24, 2013
Posts
2,709
Reaction score
671
Location
cabot AR
good job man. yeah he tie rods are no big deal. if you are going to swap the outers I would swap the rears while u are at it. wont cost much more and you will already be in there anyway. when u said clunk clunk from the middle I assumed the yolk on your rear driveshaft (very common problem) but it only happens when u stop? not taking off?
 
OP
OP
blizz

blizz

Full Access Member
Joined
Nov 29, 2009
Posts
545
Reaction score
7
Location
San Antonio, TX
I don't hear it taking off so much if at all just when slowing down. I'll have to get under there and see if anything is loose. You mean the inner tie rod ends? If so yeah I thought about ordering them as well.
 

jerryjoe28

That Guy
Joined
Nov 24, 2013
Posts
2,709
Reaction score
671
Location
cabot AR
hmm yea I think the yolk problem is on take off so may be something different. and yes on the inner tie rods
 
Top