-
-
GGildan reacted to B-train's post in the thread 07 GMC Yukon Mystery brake squeal Or Hub Chirp?? with
Like.
Based on the 10 min driving info, I'd go after fluid expansion due to heat transfer. Maybe the slight increase in under hood temperature... -
GGildan reacted to Dustin Jackson's post in the thread Mystery Slack/Play - Wheel hub? CV? Ball Joints? (2008 Yukon Denali) with Like.
@Gildan I would try the same test and try grabbing it at the 6oclock this time, I wonder if the tires touching the ground causes the...
-
GGildan replied to the thread Mystery Slack/Play - Wheel hub? CV? Ball Joints? (2008 Yukon Denali).Yeah, did all that. But I didn't think of re-torquing the spindle nut! I never thought of that. The 'play' might me the splined shaft...
-
GGildan reacted to j91z28d1's post in the thread Mystery Slack/Play - Wheel hub? CV? Ball Joints? (2008 Yukon Denali) with Like.
so with the truck on the ground, you grab the top of the tire, pull or push and it clunks? but no when you jack the truck up from the...
-
GGildan replied to the thread Pickup tube question on 2007 GMC Yukon Denali 6.2.I had a similar dreaded low oil pressure event consistent with the bad O ring syndrome. I replaced the oil pressure sensor. Problem...
-
GGildan posted the thread Mystery Slack/Play - Wheel hub? CV? Ball Joints? (2008 Yukon Denali) in Engine & Drivetrain.I've got a mystery issue involving play in the front end. If the vehicle is on the ground and you grab the top of the front wheels (on...
-
GGildan replied to the thread Door/warning chime/turn signal click no longer working - 2008 Yukon Denali.All stock - problem solved itself on its own by simply turning on the parking assist. If you turn it off, no warning sounds of any type...
-
GGildan posted the thread Door/warning chime/turn signal click no longer working - 2008 Yukon Denali in Audio & Electronics.This is annoying - my warning chimes and the click sound for the blinkers are no longer working. I've check the speakers in the driver's...
-
-
Loading…
-
Loading…
