Keys and 1 inch spacers

[corvette744]

Just joined today been reading up on your guys and other sites.Put new keys in and 1 inch spacers,275x60x20 goodyear duratracs-love em,and a couple other mods.Almost got her just were i want her wish it had more power.I have been looking for a couple years to find one with under 100k and mint condition-well i found it and bought it on the spot.

 

[Chubbs]

Ya buddy, that's what I'm talking about. Can you tell any difference if the feel/handling/steering after jacking the suspension up with the keys & spacers? How much did you drop on the Duratracs? $220/ea?

 

[corvette744]

Ya buddy, that's what I'm talking about. Can you tell any difference if the feel/handling/steering after jacking the suspension up with the keys & spacers? How much did you drop on the Duratracs? $220/ea?

If feels like the suspension improved a little-i put the bilstiens on also so its not as harsh a ride.Discount tire had a special on the tires buy 2 get a 100.00 off and they were the cheapest around with free shipping.Only thing it was missing when i bought it was the 3rd row seat-who cares that spot is occupied now-i installed a custom back up camera so i can see my boat at all times while towing-and it has a built in dash cam.recorder also.

 

[Cbark2305]

WHats your fender height?

 

[corvette744]

WHats your fender height?

Front or rear never measured them-or do you mean from ground to fender above tire

 

[corvette744]

Around 39 inches from ground to above each tire.

 

[Countryboy07]

Looks great! Throw some 1.75" wheel spacers on there for some added width. Here's my Yukon with same lift and tire size with spacers.

 

[Cbark2305]

Looks great! Throw some 1.75" wheel spacers on there for some added width. Here's my Yukon with same lift and tire size with spacers.

View attachment 178288

Still by far my favorite looking ride. Just looks so clean

 

[richs1]

Corvette 744, any trimming needed? Any rubbing? What offset are you using on the wheels. I am looking at 20" fuel couplers and would like to run 33 x 12 if possible, looks like your tires are about 11. I am adding aftermarket keys and 1.5 inch spacer to the rear. I appreciate your input.

 

[corvette744]

Corvette 744, any trimming needed? Any rubbing? What offset are you using on the wheels. I am looking at 20" fuel couplers and would like to run 33 x 12 if possible, looks like your tires are about 11. I am adding aftermarket keys and 1.5 inch spacer to the rear. I appreciate your input.

View attachment 184380

NO trimming at all stock gm 20 inch rims dont no the offset off hand.I dont even think i need the rear spacers-seems half inch higher on the pass side in the rear cannot figure it out.