Search results

  1. OhFourChevy

    Console Vault or others

    Does anyone have any experience with this? Just saw them a few weeks ago and peaked my interest, I've been think of adding a few firearm storage components in my Tahoe, was thinking of getting a drawer style under the bed safe and bolting it down in the rear cargo and then either carpeting the...
  2. OhFourChevy

    Do our truck keys have transponders?

    Basically I'm looking into a Keybar key chain, and my keys are stacking up with various work keys, house, various master locks etc... I'm wondering if we can get old school all metal keys for our trucks? I am getting a Viper alarm soon with remote start, so there will be an immobilizer, so I...
  3. OhFourChevy

    Cutoff mod for Depo Projector

    My cutoff is pretty jacked on one side, I'll take pictures at some point, but has anyone ever removed the cutoff shield and replaced it with a straight cutoff shield?
  4. OhFourChevy

    lower ball joint replace or new control arms? 85k

    So the title basically says it all, I am wondering whether to get new Moog RK lowers, or just get new ball joints. Are our ball joints usually that much of a PITA to remove (Texas truck its entire life, not rusty) or are they removable at all? So I am going to be getting all of this installed...
  5. OhFourChevy

    Thinking about going back to a factory muffler

    so I've recently done 4.56 gears, I currently have 295/70r17 tires, but moving to 35s around Christmas, I do a bit of Highway driving about 200mi a week give or take, my mbrp cat back makes too much noise, since I'm sitting at 2200 rpm at 70mph. Now I'd imagine I might drop to 2000-2100rpm when...
  6. OhFourChevy

    Another HD grille question

    I have a 1.5" gap between my NFab bumper and my factory grille, is that enough gap to slap an HD grille on? I know factory bumpers have a small gap, and I've seen on several posts you need to trim 1.5" off the bottom of the HD grille, so I'm thinking that maybe my bumper has clearance for it.
  7. OhFourChevy

    Hydro-Boost RPO Code

    does the JH2 RPO code for Hyd Power Brakes mean that I have Hydro-Boost? I am getting a brake flush tomorrow and I would like to know because the difference in brake fluid cost. Thanks y'all
  8. OhFourChevy

    Re-Gear break in Time

    I've seen several different ranges of miles, speeds, minutes, etc. The general consensus seems to be that you've gotta drive 20-30mi then let it cool all the way down 5-10x then drive it nice and easy, no faster than 65mph for 500mi then dump the fluid, check it for any re shim needs, backlash...
  9. OhFourChevy

    52" curved on the windshield?

    What's everyone using for mounts? NFab, Rough Country, eBay, Amazon? It seems like the NFab would mount higher than I want, I'd really like the mount to be as flush to the body as possible and hang over a small portion of the windshield or just barely above it, anyone have any pics or ideas...
  10. OhFourChevy

    Driver side grab handle/strap ANYONE WITH THEIR HEADLINER OUT?

    I've been contemplating taking my "old man steps" running boards off, and I'm curious if anyone has found a particular strap or handle for the driver side, I'm thinking I might have to rig up a door puller strap or something as I continue my lift. Thanks!
  11. OhFourChevy

    Nnbs heads and intake

    I'm wondering if they're a direct swap other than maybe milling the heads .03 or .04 or keep stock compression. I'm planing on eventually doing a mild cam like a zo6 or a 221/221 ...... from comp or Texas speed, in conjunction with the heads (port and polished) and intake manifold and possibly...
  12. OhFourChevy

    I found the permanent fix for Depo wiggle/wobble

    So my factory headlights were wobbly from the time I bought it a few months ago, I had a plan to get Depo projectors, but with the issue of the wobbly headlights after the Depo switch made me worried that if I switched they would be even more wobbly! So I did some searching, my headlight...
  13. OhFourChevy

    Can't find the answer....

    So I got my black Depo projector headlights in yesterday, today I'm on a plane out of state, so I can't take any pictures... So, the headlights look to be an "exact" match with the exception of the adjuster screws, they're not the same torx key. They look to be just a really really small...
  14. OhFourChevy

    Tube bumpers (pre runner style)

    so all I can find as far as the front bumper is the one Nfab makes, anyone have one built by a fab shop? How much does it run usually? Anyone know anything about tube bumpers in the rear and swing mount spare tire carriers that fit out trucks?
  15. OhFourChevy

    Rearend lift, skyjacker questions

    So I'm interested in finding what's the difference other than load in the rear coils of a suburban vs a Tahoe? The main reasoning I'm curious is I need to lift the rear end of my truck 4-5" and I don't want to go with a 3" spacer, I am okay with 2". I'm looking into using either skyjacker c25r...
  16. OhFourChevy

    Hood won't stay up

    anyone else having this problem? Cheap fix? Adding a strut?
  17. OhFourChevy

    Nnbs PPV push fitting to our trucks?

    Has anyone fit a nnbs PPV push bar to they're nbs? There's one selling for super cheap on Craigslist
  18. OhFourChevy

    Has anyone done this?

    I'm going to get depo projectors. I was wondering if anyone has used led bulbs in the depo lights? What brand HID are good? Kensun?
  19. OhFourChevy

    Rear audio control

    Okay, so I'm going to either jump on a silverado cubby, or not. Only reason I wouldnt is if removing the rear audio controls messes with the way the Bose system works. I thought I read somewhere that if you remove the rear audio controls that it will disable the rear speakers. If anyone...
  20. OhFourChevy

    Building my amp rack...

    So, first off, I've never done this before, always had a professional install, but I'm diving into this full throttle, I want to take more ownership in my ride. Ive always done most of my own mechanical work, but never my own audio work. So here's the deal, I've already ordered the q-logic...
  21. OhFourChevy

    I got my pioneer avh2800bs installed but.....

    I can't find the ******* parking brake wire. So even if I didn't buy a micro bypass, the dvd system still won't work because I have found the parking brake wire to splice and connect... Also I can't seem to get the PAC system to get my SWC to work. I tried reprogramming but I guess it's not...
  22. OhFourChevy

    Brand New to the Tahoe

    How's it going y'all, I'm a proud new owner of an '04 Tahoe LS. I'm brand new to Tahoe's in general, I'm coming back to Chevy after briefly switching to the dark side (Ford) I was hoping some one could lend a helping hand with a question I have. Are the 4wd lift kits compatible with the 2wd...

Forum statistics

Threads
129,543
Posts
1,817,521
Members
92,774
Latest member
chslax10

Latest posts

Top