Recent content by khollenb
-
K
2005 Yukon, oil pressure pegged at 80
there is a also a screen below the sensor . take it out and make sure its clean. you will need a pick and patience to remove it. its a good idea to replace it. they are available at a gm dealer and inexpensive. -
K
Loud knocking sound in climate control -- Blend door actuator?
If you can get to it either get the part number and go to a gm dealer and have them look for it and any supersedes and be sure to check the number of pins in it it normally will be the same,Ken -
K
2008 chevy tahoe blower motor question
There are either 3 or 4 screws holding it on some are rather hidden and difficult to put back in especially with a center console, once out you just fight it out. -
K
passenger seat belt
Morning all, has anyone had a problem with the passenger seat belt tightening and locking causing you to have to release it and rebuckle, thanks in advance,Ken -
K
Stock Keyless Entry Failing?
you also may try taking a pencil erase and cleaning the circuit boards carefully.they sometimes are dirty and wont send properly- khollenb
- Post #7
- Forum: Audio & Electronics
-
K
Escalade Vs Denali Vs Tahoe Cluster
it is not plug and play needs to be programmed and be sure to write the hours down before removing
