thehoe92 Build
- Thread starter thehoe92
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Eagle
Thansk for all the help -STAFF!
I vote Kasey cause Steve Meade is a pompous ignorant fat-ass douchebag.so we'll see a youtube vid of Kasey vs. Steve Meade soon??
matt14
Full Access Member
He is? I always heard even from Kasey that he was a cool guy.
killer20072001
Yep
I always thought he seemed like a cool dude from the vids. Always letting random people who wanna hear the bump just jump in his ride. His videos are very informative too.
matt14
Full Access Member
Thats what i was thinking. If you go on his site and read the forum, he seems hella chill and seems to help out anyone.
actually I've been seeing a lot of DIY jobs lately and appreciate my own that much more haha!
I love working really hard and paying attention to every detail then putting it back together, like the center console, and seeing the finished product
but thanks!!
if I said I had 2 in the front that was my mistake
maybe 2 6.5's but not 2 sets
I am hoping to get another 6.5 set for my Q-Logics
those were the Fosgate speakers
the t3's tweeters blew as soon as I put them on power so those came out right away
well thanks I guess haha!
but what makes you think that?
I'm curious...
chill ass dude to me, always hooks me up when I need it.
texted him on a few random days and got demos so I'd say he's pretty cool
true that!
I know a lot of people with loud systems that think they are above everyone else and no one should be blessed to hear there system
steves down to let anyone hear it
yup yup he stays pretty active on his forum
on to the updates since I don't think I brought it over here yet
past 2 weeks I...
bought a Sundown SAZ3500D
set my mind on 6 15's I just can't decide which ones yet I'm stuck between a couple brands
just bought a battery tonight weighs 110 pounds but has a 134ah rating
that will be 1 of 4 batteries
talked to Rockford about some more components
going to buy some Kicker Hyperflex pretty soon to get a ground run and some misc. pieces for amps to batts and interconnecting batts
thats all I can think of right now besides its going to be tuned stupid low and the amp will be wired at .67 on 15.2v
matt14
Full Access Member
Damn Kasey, 6 15's! Is this all going to be ran off the one sundown amp? You trying to get sponsered? What brands are considering for the subs?
killer20072001
Yep
Holy shit a battery that weighs 110. Man I wanna see this monster.
all off the sundown hence why its going to be wired to .67
with all those subs in one box off one amp I won't see .67ohm but its nice to be able to wire below 1 ohm without it going in protect
yeah I picked it up initially said it wasn't too bad..
walked it over to my hoe and it was a little heavier
got home and pulled it out, ****** gained a few pounds haha
carried it upstairs and I was reminded why I started with only 1k watts on a little Kinetik haha
it will be 1 of 4 though
with all those subs in one box off one amp I won't see .67ohm but its nice to be able to wire below 1 ohm without it going in protect
yeah I picked it up initially said it wasn't too bad..
walked it over to my hoe and it was a little heavier
got home and pulled it out, ****** gained a few pounds haha
carried it upstairs and I was reminded why I started with only 1k watts on a little Kinetik haha
it will be 1 of 4 though
fatnlowtahoe504
Full Access Member
yea to me he is a cool dude too, ive talked to steve a few times before over the phone and he seems down to earth to me....everyone is entitled to have their own opinion tho...
Eagle
Thansk for all the help -STAFF!
As long as you kiss his ass and/or don't disagree with his quality of work, constant self *******, or late 90s SPL philosophy, he likes you. He has to, he wants to make money off you.
When you have any disagreement he acts like a little gangstah-wannabe ***** and starts with the immature profanity and name calling. Basically, he's a prima-dona, and i have 0 tolerance for people who think they are the shizzle or above adult conversation merely because they have internet nutswingers.
Generally he does decent quality work, I'd give him a solid 7 on fabrication, but he's not very innovative, he isn't open to critiques, the work underneath the flash is middling at best, and he generally behaves like a complete douchebag blingboy in every vid I have ever seen him in. I might have though that was cool if I was 15 or 20, but I am not.
I don't doubt that under certain conditions he is very nice, but I personally don't like him.
When you have any disagreement he acts like a little gangstah-wannabe ***** and starts with the immature profanity and name calling. Basically, he's a prima-dona, and i have 0 tolerance for people who think they are the shizzle or above adult conversation merely because they have internet nutswingers.
Generally he does decent quality work, I'd give him a solid 7 on fabrication, but he's not very innovative, he isn't open to critiques, the work underneath the flash is middling at best, and he generally behaves like a complete douchebag blingboy in every vid I have ever seen him in. I might have though that was cool if I was 15 or 20, but I am not.
I don't doubt that under certain conditions he is very nice, but I personally don't like him.
they are the P1652-S components
and Eagle like fatnlow said everyone is entitled to their opinion
I think if you actually met him it would be way different, its truly hard to judge someone over the internet
but I'm not here to argue about Steve in my build thread
the hoe under going surgery haha!
yee buddy!
trimming parts of the fender liner that rub
the drivers side bump stop bracket is a little longer and this picture also tells me I need shorter end links haha!
and Eagle like fatnlow said everyone is entitled to their opinion
I think if you actually met him it would be way different, its truly hard to judge someone over the internet
but I'm not here to argue about Steve in my build thread
the hoe under going surgery haha!
yee buddy!
trimming parts of the fender liner that rub
the drivers side bump stop bracket is a little longer and this picture also tells me I need shorter end links haha!
Last edited:
here you go killer
what its like from my point of view
you can see where it started to rub before I rolled the fender
and my favorite picture of the group
took the front 6 body mounts out today
it was a lot trickier than the rear
but it was fun seeing my hoe tuck tire
and the gap between the back hatch and rear bumper
you can also see the lack of tow hitch since I didn't have any pictures of it before
I need to do some serious fender rolling because all 4 corners rub.. well actually I figured out the back 2 wheels were rubbing on the plastic fender liner in some spots still so I cut it a little more but she's lookin real clean tonight I'll get some updated pictures up of the body drop tomorrow
and the way it sat before I did the front body mounts
what its like from my point of view
you can see where it started to rub before I rolled the fender
and my favorite picture of the group
took the front 6 body mounts out today
it was a lot trickier than the rear
but it was fun seeing my hoe tuck tire
and the gap between the back hatch and rear bumper
you can also see the lack of tow hitch since I didn't have any pictures of it before
I need to do some serious fender rolling because all 4 corners rub.. well actually I figured out the back 2 wheels were rubbing on the plastic fender liner in some spots still so I cut it a little more but she's lookin real clean tonight I'll get some updated pictures up of the body drop tomorrow
and the way it sat before I did the front body mounts
Last edited:
blueflamed03
Elite Member
I should frequent SM forum more being a mod there.....
really whats your screen name over there?
you can just hand the mod powers to me I'm sure they wouldn't mind haha I'm over there so ******** much
almost up to 5k posts and I joined december of 08
true perspective from my POV
one of the front body mounts
just a little comparison, this picture was right after I first cleaned it
I want to get that rear hatch shaved pretty soon but I'll probably just wait until I get my roll pan
tow hitch gone
some DJM drop shocks will be going in soon thanks to Steve
never really got some good pictures of the suede and some people were asking
5% on the front
6" 5% strip with 35% on the bottom, as you can see its not impossible to see out of
you can just hand the mod powers to me I'm sure they wouldn't mind haha I'm over there so ******** much
almost up to 5k posts and I joined december of 08
true perspective from my POV
one of the front body mounts
just a little comparison, this picture was right after I first cleaned it
I want to get that rear hatch shaved pretty soon but I'll probably just wait until I get my roll pan
tow hitch gone
some DJM drop shocks will be going in soon thanks to Steve
never really got some good pictures of the suede and some people were asking
5% on the front
6" 5% strip with 35% on the bottom, as you can see its not impossible to see out of
Last edited:
pmdogg
Member
ballerz
blueflamed03
Elite Member
will PM you.
99Tahoe
Member
Great build man. Following
Similar threads
