Search results

  1. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I broke one of the cardinal rules of upgrades (tackling 2 projects at once) - the Suburban had 3 blown speakers when I bought it and I ran a fused 00 wire through the firewall to power 2 amplifiers in the vehicle. When I replaced the factory sub with a 10" sealed model (in the factory...
  2. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    You're not wrong, technically, but had they wired the bus in parallel, you could unplug any module without tanking the entire system downstream of it. If anything, it should trigger an error code for the module in question, rather than everything downstream instead...
  3. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I assumed that it was bluetooth only, but when I searched for it by name it mentioned the Onstar system as well. I never use Onstar, so it didn't occur to me to verify that it was working... After printing out dozens of pages from the OE wiring diagram, I noticed one that listed the high speed...
  4. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Excuse my language, but ******** it. ONE plug. About 1/8" from fully seated. Why in God's name is CANBUS communication wired in SERIES and not parallel...? Each module acts as a gateway for the modules downstream of it. I have no idea who concocted this absolutely insane idea, but I...
  5. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I just drudged through ALL of his videos and found the Escalade one, as well as part 2 of that Beached Whale... Definitely some good stuff, thank you! I'll report back with an update, thank you guys!
  6. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I'll give it a whirl, thank you! The part that drives me the craziest here is that it runs and drives, w/ functional 4WD... yet ALL hi-speed canbus modules fail to communicate. If it was a lawn ornament, I'd have probably figured it out by now :banghead:
  7. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I just thought of something... does GM use the ABS module as a gateway for the other modules? If so, that might explain a failure to communicate, despite the parallel nature of their functionality. If the CANBUS itself isn't parallel, but the power to each module is, that could potentially...
  8. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I have; unfortunately, each individual module (I tried all of them, individually and together) yielded no effect. I definitely appreciate the suggestions, nothing is too silly to try at this point. I think I'm at the "buy an ECM and hope it works" point, considering the consistent ~120 ohms at...
  9. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I'm too stubborn to call it quits, so I'll figure it out eventually. I just may be in for a rough winter in the meantime! :banghead:
  10. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Thank you for your kind words, Speck! Unfortunately, no solution thus far. I'm still driving it every day, although I've been more and more annoyed with this issue as a result. I pulled the underhood UBEC, blew it out with compressed air, sprayed it thoroughly with contact cleaner and let it...
  11. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I think that's the most logical course, at this point... The other terminating resistor is built into the BCM for these guys, isn't it?
  12. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Alright, I'll humor you since you're so insistent - ripping out 0 awg wire and replacing it with stiff, pre-moulded 4 awg will magically fix the canbus? Are you volunteering to pay Stealership prices for the wire and then reimburse me for the time when the obvious occurs? Nothing is...
  13. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    The measured resistance at the DLC tells me you're probably right. The shop tech I worked with's explanation for the ABS module suspicion was basically that it interprets the readings from the hall/wheel speed sensors at each wheel, then sends the data to the other modules. That would explain...
  14. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Update: Went to a local shop, worked with the techs there for a few hours to try and narrow it down. They are convinced that the ABS module is the root cause of the issue. Voltage and resistance measured at the ABS plug is as it should be. After I got home, I measured resistance between pin...
  15. T

    07-13 Denali taillights

    They're awesome, thank you!
  16. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Unfortunately I'm beginning to think the same. I'll give it one more whirl by trying to test the modules, I hate paying "diagnostic" fees that are easily inflated.
  17. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Update: 4WD (4 high/auto/2 high, NO low) still works, ABS/traction control are completely non functional, and it randomly goes into limp mode on start-up. There's no rhyme or reason to it... It'll refuse to downshift, won't rev past ~2,000 in Drive (but will in lower gears), and it's gutless...
  18. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I throw it into 4 low once/month to test functionality, so I know it worked prior to this.
  19. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    The thing I can't wrap my head around is that the 4WD works (minus 4 low), which makes me really suspect the TCCM is functioning but not communicating with the other modules
  20. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    I don't have those, thankfully; it's a moderately optioned LT, I added front heated seats myself but they're a simple relay/switched setup and didn't rely on any other systems.
  21. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    The BCM would affect all of these, but I'm hesitant to suspect it outright when everything else works... It's a complex system, but I can't help but feel that it's something specific to the wheel speed/hall sensors. What's frustrating is that those should populate an error other than a failure...
  22. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Thank you for that, I've been chasing that rabbit hole and it was right up there with the non existent fuel pump fuse/relay fiasco for the 2008 model year! I've inspected everything that's readily visible, 100% of the wires that I worked with when I changed the battery cables out as well. I've...
  23. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    We can add EBCM communication failure to this list, which doesn't surprise me. I'm hoping that these are somehow tied to the auxiliary BCM, although searching that query has been less than useful thus far.
  24. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    Some data from the Tech2 emulator.
  25. T

    SOLVED - Big 3 upgrade, EVERY warning light on immediately after.

    It IS showing no communication for "Body control module (aux)", which I'm unsure of... Is there an auxiliary BCM? If so, is it tied to the ABS, TCCM, Traction Control, etc?
Top