Search results

  1. salisburyv

    what ratio for front axle assembly

    e bay has em too. used
  2. salisburyv

    possible bad rear diff? need advice

    So does temps in the 50s.... got it all wrapped up and drove it. its much better way harder than I thought it would be
  3. salisburyv

    possible bad rear diff? need advice

    Update: we had first snow of the season. about 6". so I didn't start as early as I had wanted to. old ones out/new one is in. The brakes on the new one look almost new, so I be keeping them. starting wrapping things up, it was a PITA to get the upper trailing arms lined up, but with the...
  4. salisburyv

    possible bad rear diff? need advice

    I greatly use PB as well. I'll look into getting the acetone. it's really rusty under that truck. lived it whole life on the coast in New England so..... I did double check before I pulled the trigger on the u joints. I got them, new straps and U bolts. I'll go local for the brake fluid...
  5. salisburyv

    possible bad rear diff? need advice

    Wow!! Thank you for this. what a time saver. I have access to a lift. so I'll remove most of the bolts, then lower it down to get the rest. I'll have my floor jack support it in position until I get it free. inspect and swap over what needs to be swapped. I plan on popping the cover off...
  6. salisburyv

    Wheel "hop"?

    I can confirm, the Scorpion AS/3 tire by Pirelli is a superior tire. Goodyear or Michelins are either too soft or too hard. I chewed through a set of Michelins in 10k miles. My buddy almost wiped out with the Goodyears. And the Pirellis are quiet.
  7. salisburyv

    possible bad rear diff? need advice

    ok. awesome!! I thought I should do the u joints. it's due for an oil and filter change. Brake fluid change is also I great idea!
  8. salisburyv

    possible bad rear diff? need advice

    ok. I paid for the unit. They are gonna try to get it to me before Christmas, but he said def by the 26th. Do you guys have any tips/tricks I need to know? what else should I replace while I'm doing this? U joints? Bushings? any info would be helpful. Thanks in advance
  9. salisburyv

    possible bad rear diff? need advice

    99% of the time its a highway cruiser. I go up to Maine regularly, my daughter goes to college up there. The ride is very smooth, and with larger wheels/tires than stock it always feels well planted. I have a nice sound system in it, and the miles just melt away,lol. I'm hoping to get a look at...
  10. salisburyv

    possible bad rear diff? need advice

    thanks for all the info guys, I really appreciate it. I found a unit locally for $250 out the door (plus my core). same year, RPO code , 8.5" ring and pinion and ratio (3.08) I'm gonna go pay for it tomorrow, then they'll pull it for me and I can get it. I tried to use the truck this morning...
  11. salisburyv

    possible bad rear diff? need advice

    I usually don't tow.
  12. salisburyv

    possible bad rear diff? need advice

    I have 3.08. will the 3.42 work? or will my mileage be worse than it already is? I have found a few complete units, none near me of course. I'm waiting to hear back on 2 of them. Both state 10 bolt, G80, GU4. 3.08. that's me!! one is $249, the other is $400. both graded A...
  13. salisburyv

    possible bad rear diff? need advice

    obv, I cleaned all the garbage out and replaced with 75w90 gear lube. no limited slip modifiers. fingers crossed
  14. salisburyv

    possible bad rear diff? need advice

    oh, I turned the wheels my friend... that's when I could see some of the teeth on the spider gears were chipped a bit. but it didn't get hung up. moved smoothly. now, I'm hearing a humming noise. pitch changes with speed. so, wheel bearing most likely, or the spider gear assembly is making...
  15. salisburyv

    possible bad rear diff? need advice

    Hey fellas. Day off today, so I ventured up to my in laws. He's got a lift, and I was able to use some power tools to remove the cover and take a peek. 1st, the fluid was black, the magnet inside the cover was coated in nastiness. Worse news, appears the spider gear housing has a nice crack...
  16. salisburyv

    possible bad rear diff? need advice

    I jacked it up and put it on jack stands. I started it and put it in drive and slowly took my foot off the brake. both rear wheels spun, no locking up of any kind. I stuffed the brakes, applied them slowly, no lock up. put it back on the ground and went around the block and the left rear...
  17. salisburyv

    possible bad rear diff? need advice

    no dash lights on. in the past I'd get a service stabilitrak message, it needs a wheel speed sensor, which I have already bought. but it went away once I put new pads on.
  18. salisburyv

    possible bad rear diff? need advice

    ty. I really don't want to sell her. I put a lot into it, and despite this hiccup she's been good to me.
  19. salisburyv

    possible bad rear diff? need advice

    I don't know. what would I. be looking for? chipped teeth on ring and pinion? metal debris? thanks for the reply
  20. salisburyv

    possible bad rear diff? need advice

    hey all. I did search, and read quite a few posts which did not address my problem. I was pulling into my gas station the other night and I could hear/feel a rear wheel locking up. put in some gas, had wifey with me, so I babied it to make it home. Finally had a min today to take a look...
  21. salisburyv

    2023 wheels & tires on my 2013

    what will they think of next?
  22. salisburyv

    What would you do? Truck Needs Engine?

    Excellent advice. Let us know how it goes please. Good luck!!
  23. salisburyv

    3 out of 4 Door Speakers Not Working (2001 5.3L)

    Ive always had luck with Crutchfield.com . They know what'll fit and work best with your stock set up. Most likely a set of kicker 6 1/2's in the front doors and you'll be good to go. Hope this helps!!
  24. salisburyv

    Brand New Yukon - Warning light driving home from dealership

    Sounds like they're guessing, and throwing parts at it. i agree with a previous post, in that, it sounds like the car wasn't fully PDI'D. I bet the Constar didn't work before either. Don't scrap the vehicle because they're inept. If possible find another dealer who would be willing to look at...
  25. salisburyv

    What would you do to stand out?

    it takes work to stand out. I started with the sound. i deleted the resonator and went with a Magnaflow 14" muffler. I removed the side cladding , and the roof rails. I ditched the oxidized 17" stock wheels for the same wheels that are on your Grey one. I de badged it (all but the grill... and...

Forum statistics

Threads
137,672
Posts
1,989,114
Members
102,675
Latest member
j_jerry79

Latest posts

Back
Top