Search results
-
Show off your 2015+ leveled Tahoes and Yukons!
Finally got around to taking some good photos after the Cognito 3” lift with fox 2.0 coilovers. Lifted 3” in front and 2” in rear. 285/70r18.- Tahoe_Rx
- Post #978
- Forum: Lifted Supension - Z71 & 4x4
-
Cognito 3" elite Vs Icon stage 2
I put the 3” Cognito on my ‘19 Tahoe and absolutely love it- Tahoe_Rx
- Post #5
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
@BigBoyZ71 thanks. They didn’t include any instructions and couldn’t find anything online. Found a YouTube video showing install on the bottom. Then I called ready lift to confirm and they said to install on top. Which left me confused with conflicting info so I called again the next day and...- Tahoe_Rx
- Post #968
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
@Oh Kee Pah So my truck had a little too much squat after the 3” Cognito/fox front lift and only a 1 inch spacer in the rear. I ended up ordering the dobinson’s rear springs to provide 2” of rear lift to level everything out. Unfortunately the fox rear struts that came in the Cognito kit are...- Tahoe_Rx
- Post #965
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
@Oh Kee Pah thanks for the reply. I am definitely looking for improved offroad performance hence my switch from leveling spacers to the 3”Cognito/fox coilovers lift. The tie rod sleeves look simple enough, I will knock that out on my own and take a better look at my away bar angles to see if...- Tahoe_Rx
- Post #962
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
This has me wanting to step up to 295/70r18s now that I have a new 3” lift on. Currently running 275/70r18s. They fit well when I had a leveling kit but feel small now with the new lift.- Tahoe_Rx
- Post #960
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
Do you have links to tie rod sleeves and sway bar links that would work for this build? I always have a hard time finding parts that work on lifted 15-20 tahoes- Tahoe_Rx
- Post #958
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
I considered the 6112s but it seemed like you could only get 1” of lift out of them and they don’t recommend running a spacer on top. That is ultimately what pushed me to the 3” Cognito lift.. only other choice would have been a Cognito 3” lift with kings instead of the Fox 2.0s. The kings 2.5...- Tahoe_Rx
- Post #956
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
Ride is great. Stiffened up some; eliminated nose dive when stopping, nose dive or lean when cornering etc. but still comfortable. Biggest improvement is the rebound after a big bump. On the stock suspension I would bounce up and down 3 or 4 times after a big bump before the suspension settled...- Tahoe_Rx
- Post #955
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
Here is one more until I have time to take some decent photos and do a full write up haha.- Tahoe_Rx
- Post #952
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
Here is a teaser. I will pull it out to get better photos later and post a new thread as I don’t think anyone has done a complete write up on this kit for the 15-20 trucks on here yet.- Tahoe_Rx
- Post #949
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
The kit included Fox 2.0 rear struts as well. They do not provide any rear lift but I already had a ready lift 1” spacer under the rear springs from my previous leveling kit. It is slightly higher in the front than the rear but isn’t to “dog dragging its butt”. I have a decent amount of weight...- Tahoe_Rx
- Post #948
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
Just had the Cognito 3” lift installed with Fox 2.0’s and man is it sweet. Ride quality is incredible. I regret not doing it sooner. I will upload some photos tomorrow when it is light out. I had a 2” level installed before (spacers with stock struts). Not sure if my factory coilovers were...- Tahoe_Rx
- Post #946
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
https://a.co/d/7xYx77V This is the link to the side steps. I had low expectations given the price but took a shot because I hated the plastic OE steps. I have had them on for 2 years now with no issues. Sturdy, no rust, no chips on coating and plenty strong for my use as this is obviously not a...- Tahoe_Rx
- Post #945
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
Also planning to change out my spacer leveling kit for the Cognito/Fox 3” lift/level kit. It uses new UCAs and Fox 2.0 coilovers and rear struts. Hope to have the suspension changes done in the next month or so- Tahoe_Rx
- Post #944
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
Yes, I have an ARB compressor mounted in the spare battery tray under the hood. Have an 8 gang aux beam switch near the headlight control on the dash to control light cubes, light bar, reverse lights and air. The brush guard is from Steelcraft. I will have to look back through emails to find who...- Tahoe_Rx
- Post #943
- Forum: Lifted Supension - Z71 & 4x4
-
Show off your 2015+ leveled Tahoes and Yukons!
2” front level with 1” rear spacer. 275/70r18 on fuel rebel 6 18x9 with -12 offset.- Tahoe_Rx
- Post #941
- Forum: Lifted Supension - Z71 & 4x4
-
2019 Tahoe Small Mirrors
I actually found some locally through FB marketplace for $200. My Tahoe is summit white, don’t think they made any Escalades in that color so just going with black mirrors. Will plan to pick them up tomorrow -
2019 Tahoe Small Mirrors
Yeah my current mirrors are power fold, heated, puddle light, blindspot monitor.. I just hate how small they are. So hopefully an easy swap -
2019 Tahoe Small Mirrors
Are the completely plug and play? I have a 19 Tahoe LT but hate how small the mirrors are. Escalade mirrors have same wiring harness etc? -
Steelcraft Brush Guard
Yeah. Lose the tie hooks for the frame mounts. And there is a second set of brackets that connect to the bumper and come up out of the grill. So 4 mounting points in total -
Steelcraft Brush Guard
Installed a Steelcraft brush guard today. Haven’t seen anyone else post about them so thought I would share . Overall was pretty easy, but it did take me around 5 hours. Would be much faster if you have a second person. My install was also slower because I had to remove a rough country bull bar... -
Lock'er Down® LD3050 Long Gun Safe for & Yukon XL Suburban, Tahoe, Escalade, Yukon
Are these still available? I have been looking at these for a year or so and was finally ready to pull the trigger on the version to install behind the 3rd row and I can’t find them anywhere anymore.- Tahoe_Rx
- Post #6
- Forum: Lock'er Down Security Products
-
Hello From Boston!
How have you liked the boost auto mirrors? Any issues? I am considering installing on my ‘19 but haven’t seen many reviews.- Tahoe_Rx
- Post #18
- Forum: Introduction
-
Removed factory running board
I ran it with no running boards for over a year but my wife hated climbing in and out with the level and bigger tires. When she was pregnant I ended up adding some aftermarket aluminum steps. I have had them on for quite a while and they hold up much better than the factory plastic steps that...
