Search results

  1. InTruckDesign

    2015 Tahoe with Fox 2.0 Coilovers + 275/60/20 K02s

    Thanks for the info...truck currently has a Fabtech 4" kit on it...might take it off and just go with the Fox setup.
  2. InTruckDesign

    2015 Tahoe with Fox 2.0 Coilovers + 275/60/20 K02s

    Looks great, I am currently looking to ditch my front magnetic ride and go to an aftermarket coulover. How is the ride? Where did you purchase them from? Any insight you could offer would be great. Thanks.
  3. InTruckDesign

    2016 Yukon Denali 4x4 4” Fabtech

    What Monroe's did you go with? I am seriously considering swapping my front mrc's for maybe Rancho or Bilstein. Did you keep the rear auto leveling/mrc shocks? I can say the rear rides much better than the front on mine, so only looking at the fronts plus I want to keep auto level due to trailering.
  4. InTruckDesign

    2016 yukon xl denali 4inch lift 4wd

    I was in a jam and just bought out of pocket, under $50 shipped so can't complain. I heard and knocking going over washed out dirt roads and then my wife could feel it in the floorboard. It also started doing it on uneven paved roads. I was able to duplicate the sound by grabbing the top of the...
  5. InTruckDesign

    2016 yukon xl denali 4inch lift 4wd

    I figured I would post this here since it seems to be fairly current. I ended up blowing an upper ball joint on my Denali this past Sunday, about 20miles into a 300 mile trip and 5hrs from home. Just a fyi, the upper ball joints in this kit are Fabtech specific and cannot be cross referenced...
  6. InTruckDesign

    Yellow Fog Lights on 15+ Tahoe

    I did 3500k hid bulbs in the stock fog housings on my Denali XL. I did not like the fact that if I did the film you see it all the time. Let me say after driving in the rain, fog, snow these fogs cut through and make the road visible this is the 3rd GM SUV I set up this way works awesome.
  7. InTruckDesign

    How many of you actually off-road with your 2015 and newer Tahoe/Suburban/Yukon/XL?

    I did some fire roads which double as OHV trails this past summer. Nothing extreme at all, but dirt, bumps, mud etc. For what the truck is it did fine, wish I had some Fox/Icon/King coilovers on it so I could turn up the mph a little.
  8. InTruckDesign

    2016 yukon xl denali 4inch lift 4wd

    Nice! Thanks.
  9. InTruckDesign

    2016 yukon xl denali 4inch lift 4wd

    Cbraga, truck looks nasty!!! Any pics of the front lower spacer you added and also what size wheel spacers did you go with? I am currently trying to figure out my wheel tire combo, the Fuel wheel/tires have been great except for the tires going out of round and wearing all weird(rotated every...
  10. InTruckDesign

    Lifted with Auto Ride

    Sorry for the delay, Front-39.5" Back-40.5" The rear springs have settled some since I measured it when I put the kit on over a year ago. So now only 1" difference.
  11. InTruckDesign

    Lifted with Auto Ride

    Not sure, been a while since I measured... I will try to get some later.
  12. InTruckDesign

    Lifted with Auto Ride

    Fabtech 4" basic kit with an additional 1/2" up front, and Magnetic ride brackets, rear sits 1.5" higher, but dead level with a trailer. 201x10's with 33x12.5.
  13. InTruckDesign

    07-14 Tahoe retros

    Not on here much, anyone looking for shipping box would be abiut 22x22x18 and weigh 25lbs. Figure anywhere from $60-$100
  14. InTruckDesign

    07-14 Tahoe retros

    Bump
  15. InTruckDesign

    Huskyliner/Weathertech combo for sale

    Bump
  16. InTruckDesign

    07-14 Tahoe tinted tails.

    Bump
  17. InTruckDesign

    07-14 black Tahoe grill

    Bump
  18. InTruckDesign

    Elite Engineering catch can

    Bump
  19. InTruckDesign

    Show off your 2015+ leveled Tahoes and Yukons!

    I believe it is due to the new uca, I never tried them so not sure if they clear or not. My thinking is my stock 22's would clear, not sure of oem 20's and smaller though.
  20. InTruckDesign

    Show off your 2015+ leveled Tahoes and Yukons!

    I dom't see why it could not go back to stock. You probably can add to it, but I can't see that as being the smartest thing to do. Best bet would be to swap in a smaller coil spacer in the back.
  21. InTruckDesign

    Show off your 2015+ leveled Tahoes and Yukons!

    There is some cutting, well more like trimming, mostly to provide clearance for the front diff to drop down. The truck rides like it did stock. Fabtechs way of adjusting the magneride sensors up front is not adequate, but fabbing a bracket up fixes that and re-centers the sensor. I also think...
  22. InTruckDesign

    Show off your 2015+ leveled Tahoes and Yukons!

    Nice catch. My biggest pet peeve about GMC is not painting the rear pillar, to me it looks unfinished. So they were painted.
  23. InTruckDesign

    Show off your 2015+ leveled Tahoes and Yukons!

    My '16 Denali XL with Fabtech 4" kit, 20x10 Fuel Tritons and 33x12.5 Fuel Gripper M/T's.
  24. InTruckDesign

    07-14 Tahoe black optic drl headlights

    Thanks goodinblack.
  25. InTruckDesign

    07-14 Tahoe black optic drl headlights

    If I could I would. No longer have a vehicle that they will fit in.

Forum statistics

Threads
129,070
Posts
1,809,879
Members
92,135
Latest member
Cbrpilot2

Latest posts

Top