Search results

  1. S

    Torque Spec Resource

    Hi Everyone, Working on a 2005 Yukon XL 5.3 engine code Z, what is a good go to resource to get torque specs? Just looking for engine components for now. Thanks in advance.
  2. S

    Is this oil pressure normal?

    I had a very similar occurrence. I even had like a lifter knock that would occur at about 3000 RPM, but that was rare. I replaced the O-ring, and my pressure returned to normal.
  3. S

    Low Oil Pressure when at warm idle

    Ok, Great!
  4. S

    Low Oil Pressure when at warm idle

    Thanks Everyone! Any feedback on the Melling High Volume Oil Pump from RockAuto? I figured I might as well get the O ring and the pump just in case.
  5. S

    Low Oil Pressure when at warm idle

    I have a 2005 Yukon XL with a 5.3 and 197K miles. I am using Mobil 1 and change the oil every 5K miles. Over the last 3-5 miles i have noticed the the oil pressure drops to almost nothing when sitting at a stop light or just an extended idle. This has become bad enough that the oil pressure...
  6. S

    Service Bulletins

    Would an admin remove this post as I have created it in the correct forum?
  7. S

    Service Bulletins

    What is the limitation to have service bulletins installed on my 2005 Yukon XL at no cost? I have 150K miles on it and am getting a service stability warning on the dash. Using other posts and Google I have addressed the clock spring, have had the angle sensor replaced, and the right front...
  8. S

    Service Bulletins

    Thank you sir..
  9. S

    Service Bulletins

    What is the limitation to have service bulletins installed on my 2005 Yukon XL at no cost? I have 150K miles on it and am getting a service stability warning on the dash. Using other posts and Google I have addressed the clock spring, have had the angle sensor replaced, and the right front...
  10. S

    C0455 error after replacing intermediate shaft

    So, How can I tell by looking at the clock spring which way the steering wheel might be off?
  11. S

    C0455 error after replacing intermediate shaft

    Thanks Matt, I am on the hunt for someone with a Hunter System other than GoodYear and Firestone. I have been down that road on ore than one occasion already. I also know not to go to McKinney GMC, they are the ones that want $542 to replace the sensor.
  12. S

    C0455 error after replacing intermediate shaft

    Thank you, Just so I am clear, the computer will need to have the code cleared from the memory after the alignment is done - correct?
  13. S

    C0455 error after replacing intermediate shaft

    I replaced the intermediate shaft on my 05 Yukon. The knocking noise went away which is great! The problem - my trusty 10 year old assistant did not hold the steering wheel still while I replaced the shaft and now I think it is 360 degrees off in one direction or the other. The steering wheel...

Forum statistics

Threads
137,805
Posts
1,992,613
Members
102,792
Latest member
Hodmjstone

Latest posts

Back
Top