Search results

  1. aquacure

    Upper control arm problem?

    Breaking everything down to replace upper and lower ball joints. Hub completely off and both control arms hanging free. Upper on drivers side has a lot of resistance when trying to raise it and will come back down on its on, feels like a rubber band. The passenger side is completely loose and...
  2. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Installed helper air bags awhile back but just now trying them out for the first time. https://www.amazon.com/gp/product/B000CFO0GI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Really impressed for the price. As you can see in my signature pic, it already has a slight squat but that 22 footer...
  3. aquacure

    One torsion bar seems to be worn?

    If you take a C clamp and remove the flat disk, it leaves a ball that fits in the key perfectly. I used this to remove the factory key and install the aftermarket key. Both sides went the same as far as I can tell. Like I said I just don't see a way to install them incorrectly. So based on...
  4. aquacure

    One torsion bar seems to be worn?

    I installed the keys, Can you explain what "preload the drivers side" means? It only seemed like the key could go on one way. I had to use a C clamp to push the key far enough up to get the keeper in, and then installed and tightened the bolt. The only difference was to get both fenders even...
  5. aquacure

    One torsion bar seems to be worn?

    03 z71 with 188,000 miles Here is the passenger side with 3 inch keys, front leveled on both sides to 39 3/4 inches Here is the drivers side, like I said same fender height but i now have the bolt maxed out. I've read that a torsion bar on the drivers side can tend to wear out first...
  6. aquacure

    Vibration

    Cheapest thing to start with would probably be new u joints.
  7. aquacure

    Painting your roof rack (Z71)?

    So now that I have my running board/bars painted, my gosh dang roof rack sticks out like a sore thumb due to some faded spots. Whats the best solution since this seems to be a mix of plastic/aluminum? Or is it all plastic?
  8. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Those things get super brittle. You need a tool like for disconnecting fuel lines. Sometimes its those white plastic disks. Somebody help me out here.
  9. aquacure

    Bump stops

    I did everything at the same time so no "before" experience. I dont have that boat sway like people talk about.
  10. aquacure

    Bump stops

    https://www.amazon.com/gp/product/B000CN7CVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 I got these based on some feed back on here. They just barely touch now on my key lift.
  11. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Yeah literally 20 or so tabs on each side, it feels real sketchy but it finally will give. I only broke maybe one but it still went back together good. Just take your time and inch it up.
  12. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    haha. I have a tahoe list in amazon, never is empty either
  13. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Yup, the rustoleum brand from walmart. 4 coats. Its a little tough to wrestle the footpads off but with a couple of flat prybars they pop off.
  14. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Got these things painted and put back on. Experimenting with spray on bed liner...hoping it holds up to the rock pecks a little better
  15. aquacure

    Any interest in 4wd front coilovers to replace the tbars?

    Can you link some threads for the lifted version? Everything I have read has been about lowering. Very interested in this.
  16. aquacure

    MOOG upper control arm

    Makes sense. Thanks!
  17. aquacure

    My home made raptor grill lights

    looks good, can I get a link to the lights you bought? Also a little info on the wiring, like where you tied in and when do they come on. thanks
  18. aquacure

    MOOG upper control arm

    I was curious. Would replacing this part require an professional alignment after install?
  19. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I recently went with the Depo's. Nothing unique but I love em. Factory bulbs for now.
  20. aquacure

    Can you spot the screw up??

    Two brand new MOOG tie rods....lol Time to figure out Amazon returns.
  21. aquacure

    Running board question

    I'm wanting to sand these down and paint them with something like a spray on bedliner or something to stand up to rock chips. How do I get these plastic foot steps off?
  22. aquacure

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Did this awhile back. Amazon keys, 33 inch Kumho on some old texas edition 20"s New marker lights (maybe headlights for christmas, lol), tinted winchshield with brow. and finally today new front end links on the swaybar.
  23. aquacure

    Driver side power seat and heated seat failure

    Here is a good video that explains what is going on when the seats stop heating. Be aware they are trying to sell their replacement parts. Now as to why the power seat would stop working I'm not sure.
  24. aquacure

    Can't change the output of the hvac system!

    This part fixed the defroster/vents/foot on my 03. located right above the accelerator, pain the ass. https://www.amazon.com/gp/product/B001S8F2V0/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 Nathan is correct the hot/cold is a separate actuator. Put your year model and "bend door actuator" in...
  25. aquacure

    Leveling Kit or Body Lift?

    I have zero experience with body lifts, never liked that you can see the frame. But I noticed on the Z that the running boards hide them and I have an 03 Z71. I do have a dumb question. Do you have to do anything special to the bumpers or do they just rise with the body? If you do have to...

Forum statistics

Threads
129,267
Posts
1,813,042
Members
92,372
Latest member
golavaman

Latest posts

Top