Search results

  1. Ben Hinz

    How To: Setup Auto Ride for Lifts

    How’s it work when lifting an autoride truck and the stbikitrak? I’ve heard you can have issues.
  2. Ben Hinz

    My Lift and Tire Combo

    I don’t have to much knowledge on them. I’d go with one of their 5.5” kits but they can confirm if it’ll work with my truck or not. I have a LTZ with Auto ride but it’s been deleted. So in theory it should work but they beat around the bush. Sent from my iPhone using Tapatalk
  3. Ben Hinz

    Lane Drift

    Took a look, the UCA are about a 1/4” if not less off of the bump stop. I’d say it’s pretty maxed lol. I’m going to move over to a 4” lift here soon.
  4. Ben Hinz

    Lane Drift

    Sure seems like it. I will start to pay more attention Sent from my iPhone using Tapatalk
  5. Ben Hinz

    My Lift and Tire Combo

    I think I’ll be going to a 4” front lift and a 2” or 3” lift in the rear. Then I can get the AMP research boards I’ve always wanted lol.
  6. Ben Hinz

    Lane Drift

    I haven’t but I do get clunking noise when I hit bigger bumps. Sent from my iPhone using Tapatalk
  7. Ben Hinz

    Need some explanations please.

    I’ve had zero braking issues. If anything I feel it’s gotten better since I now have new tires with more traction, unlike my old used ones. Sent from my iPhone using Tapatalk
  8. Ben Hinz

    Lane Drift

    I know my right front is bad. But it just started making noise like 2 months ago and this has been happening a lot longer then that. What plastic steering shaft parts? Where can I read about this issue? I’d like to rule this out. Sent from my iPhone using Tapatalk
  9. Ben Hinz

    Lane Drift

    I just had my tires, wheels and Level kit put on 2 weeks ago. Went and got it aligned like a good human. I’m still getting lane drift on the highway. Steering doesn’t feel crazy tight like I remember when I bought it. Then again, I did come from a 95 F150 on 33s. What gives? Was thinking...
  10. Ben Hinz

    Help me decide my rim and tire size!

    Wasn’t that bad in the cutting. Took like 2 hours to get done. I’m thinking of running a 0”-3” lift Coil over from Fox Shocks and getting new UCA. I want it just a bit higher. Prob end up with a 2” space in the back so it’s a 2/3 lift. Should look good! Sent from my iPhone using Tapatalk
  11. Ben Hinz

    Need some explanations please.

    So I’m thinking of running some Fox Shocks that are 0”-3” lift. But in order to run this set up, you need new UCA (Upper Control Arms). Can some please explain to me why. I know it has to do with achieving better angles and geometry for the suspension and what not. I just can’t wrap my head...
  12. Ben Hinz

    My Lift and Tire Combo

    Check out what some of the other guys said about the NorCal mod. It doesn’t fix everything but definitely helps. I still rub but nowhere near as bad. I’m prob going to do a 3/2 lift and have no problems any more. Just need a bit more height. Also, not running any wheel spacers. The wheels are...
  13. Ben Hinz

    My Lift and Tire Combo

    I love the look without them. Also helps the truck look a tad higher when it really isn’t.
  14. Ben Hinz

    My Lift and Tire Combo

    I’ll see if I can grab some. Only problem is that cameras tend to mess with how they really look. I absolutely love them tho. Sent from my iPhone using Tapatalk
  15. Ben Hinz

    Chewbacca headlight

    I’m running Rigid Industries DOT approved fog lights with their brackets. Absolutely love them.
  16. Ben Hinz

    Have you used this Leveling Kit?

    Has anyone run the Ranchero RS999928 for a 2” level? How’s it worked out for you? I’m thinking of running either these or the Fox Shocks 0”-2” lift. http://www.gorancho.com/products/leveling-systems/quicklift-loaded-leveling-system/rancho-loaded-quicklift-complete-strut-assembly-rs999928.html
  17. Ben Hinz

    My Lift and Tire Combo

    I wish lol. Just stick spring. Idk if imma lift it to match or not. I kinda like the #CaliLean look lol Sent from my iPhone using Tapatalk
  18. Ben Hinz

    My Lift and Tire Combo

    Had to get a shot on the way out of the store today. Love it.
  19. Ben Hinz

    My Lift and Tire Combo

    Not to bad. They are A/T so had a tad of noise but nothing crazy. The stock tires were loud Bc they were old and it’s about the same level of noise. Sent from my iPhone using Tapatalk
  20. Ben Hinz

    My Lift and Tire Combo

    Truck: 2009 Chevorlet Tahoe LTZ Lift: ProRyde Lift Master level lift Tires: 305/55/R20 Wheels: 20x12 -44 Trimming: Some front bumper and the front bumper corner support was removed. Nor Cal mod to be done in the next few days.
  21. Ben Hinz

    Bump Steer and need a steering stabilizer

    I have a 2” level up from on 305/55s and I’ve got some bump steering going on. Has anyone come across a steering stabilizer for these trucks? It’s a 09 Tahoe LTZ. Need something.
  22. Ben Hinz

    Need advice on wheel spacers and stock 22 wheels

    Whatever spacer size you need get them from customoffsets.com. They are hub centric and custom to whatever size you need. There are some great YouTube videos on the channel about this. Sent from my iPhone using Tapatalk
  23. Ben Hinz

    2nd Annual TYF Meet - Palm Beach International Raceway

    I wish I could make it boys, but unfortunately I can’t. I also vote for Orlando Speed world next time. This is my home track. I won’t be running anything since my 09 with 33x13 hates be already and they’ve only been on for an hour lol. Sent from my iPhone using Tapatalk
  24. Ben Hinz

    Fabric fender liner

    Where at? Sent from my iPhone using Tapatalk
  25. Ben Hinz

    Fabric fender liner

    Not much my friend! Working like crazy as I’m sure everyone else is. How about your Got a hyper tech tune on the truck, roof rack delete, and I’m getting ready to throw my big 33x12 R20’s with -44 offset on! As for everyone else asking, I’m just looking to keep the road noise at bay. Not...

Forum statistics

Threads
129,225
Posts
1,812,423
Members
92,327
Latest member
Jake 2015 GMC Yuk

Latest posts

Top