Search results

  1. R

    Street suspension nightmare - + updated +

    The rake is a simple fix. Tony can get you a 1" spacer for the rear coils. Most aftermarket wheels are lug cebtric. Get a set of hub rings that will help...also look for sort open cap lug nuts those may work.
  2. R

    2007 Yukon XL Denali suspension

    I'm positive Tony *NorcalSS has air bag kits. Text or call him.
  3. R

    Front fender to ground measurement before and after spindle drop

    I will try to measure when I lower the truck. I have a feeling that they are close to 2 inch drop spindles but probably not exactly 2 inches so the manufacturer is just saying that for simplicity's sake
  4. R

    Front fender to ground measurement before and after spindle drop

    Could one say that for eg if I ordered 26" wheels and tires which are an inch taller than stock, that even when the front drops 2 inches it will sit only 1.5 inches lower than with factory tires?
  5. R

    Front fender to ground measurement before and after spindle drop

    I wouldn't change anything Tony. The stance on your 2/4 kit is absolutely perfect.
  6. R

    Front fender to ground measurement before and after spindle drop

    I think I understand what you mean. The vehicle rotates on an axis. For example, if i loaded the rear of the car with 1000lbs the rear would drop and the front would lift. Is that what you meant?
  7. R

    Front fender to ground measurement before and after spindle drop

    Thsnjs for the reply . Tony told me specifically that on 4x4 models the spindles give a 1.5" drop. He told 3 times via text. At the end of the day, I will install and check the amount of drop that's the only way to know for sure. I will measure from the centre of the wheel like you said.
  8. R

    Front fender to ground measurement before and after spindle drop

    I've got 35.75
  9. R

    Front fender to ground measurement before and after spindle drop

    Hi guys, Getting ready to lower a 2018 esk 4x4 on 26s. Gonna use Tony's kit with the front belltech 2" drop spindles. does anyone have a before and after wheel arch measurement in their 4x4 nnbs ? Tony already told me it's a 1.5 drop on a 4x4 but looking to check wheel arch height thank you
  10. R

    15+ Belltech Spindles 2wd/4x4 Preorders

    3 years to engineer these damn spindles! it's about time. Congratulations Tony hope you sell out!
  11. R

    Mcgaughys Economy 2/3 drop

    no spacer just the springs that came with the kit... ass was too high
  12. R

    Mcgaughys Economy 2/3 drop

    i tried djm rear springs and they rub the frame as well! What is the part # for the mcgaughys rear springs?
  13. R

    Mcgaughys Economy 2/3 drop

    Dropped strut cups
  14. R

    NORCAL SS 1-2.5/3.5-4.5 2wd/4wd kit.

    These have been 'coming soon' for a year and a half... https://www.mcgaughystore.com/2015-gmc-yukon-denali-awd-4wd-2-drop-spindle-kit-mcgaughys-34204/
  15. R

    NORCAL SS 1-2.5/3.5-4.5 2wd/4wd kit.

    its amazing the truck has been available for 2.5 years still no 4wd drop spindles!
  16. R

    Mcgaughys Economy 2/3 drop

    295/35/24
  17. R

    GMT900 DJM Rear Swaybar End Links and SPC Camber Bushings

    He never emailed me I don't know what happened so maybe
  18. R

    Mcgaughys Economy 2/3 drop

    rear settled a lot. still needs a touch more in the back.
  19. R

    How much drop? - '15 Yukon on 24's

    2/4 I have a 2/3 check my thread and the rear is too high
  20. R

    GMT900 DJM Rear Swaybar End Links and SPC Camber Bushings

    I'll take them. I need them shipped to Canada. Send me an email to roccos_van at shaw dot ca I have paypal etc don't worry.
  21. R

    GMT900 DJM Rear Swaybar End Links and SPC Camber Bushings

    Are these still for sale?
  22. R

    Mcgaughys Economy 2/3 drop

    I gave up waiting for spindles. This is a 2015i with 4wd/autoride. Back is an inch too high. Gonna let it settle then deal with it. Thanks for looking and sharing any thoughts.
  23. R

    Where are the drop spindles!

    Frustrating!
  24. R

    Where are the drop spindles!

    Are these being made in the USA or China? I wonder if it's overseas they are having so QC issues.
  25. R

    Where are the drop spindles!

    Did you get any Intel from this meeting? Thanks Tony

Forum statistics

Threads
129,258
Posts
1,812,958
Members
92,360
Latest member
csan2879

Latest posts

Top