Search results

  1. yooformula

    Wolfgang twins vs Meguiar's M105/205

    For use with 7424 you bought, get the Meguiar's microfiber correction kit. Hands down the easiest and best system to use for polishing your truck. Takes the guess work out for newbs learning to use to those not all familiar with pads/compounds. Comes with the pads and the polishing/finishing...
  2. yooformula

    Need some assistance with brakes...rears wore out in 50k miles

    Yet the fronts have almost no wear on them. I have noticed that the rears create alot of brake dust but I have never known the rears to wear out before the fronts. I have to change the pads tomorrow but what else should I be looking for? 03 Yukon, EBC pads front/rear with slotted rotors up front.
  3. yooformula

    welding my transfer case ...

    Mine has a crack and this is what I did to seal the crack over a year ago. I scrubbed the area with med grit sand paper, used some rubbing alcohol on a rag and soaked the area then heated it with a small butane torch, then used Liquid Steel. Over a year later and no leaks, sucks though that the...
  4. yooformula

    HID Reverse light install

    sits flush with a small gap around the lip but some black rtv around it and it seals up nicely. I've had mine for about 6 months now with no issues and I love it! They are so friggin bright, makes it easy to find at night!
  5. yooformula

    Do the brakes need to be pre bled via scanner/tech II?

    I've bled the system several times for each wheel yet the spongy feel is still apparent.
  6. yooformula

    Do the brakes need to be pre bled via scanner/tech II?

    I had to replace a ton of stuff on my brakes recently but still have a bit of a spongy feel. I heard that if air got into the master, that the dealer has to pre-bleed the master with a handheld, anyone ever have to do this?
  7. yooformula

    DDM Tuning HID kit install

    DDM kits took over a month to get mine and it bs that plugs werent included simply wires and no instructions. I ordered my last 6 sets via the link that was once posted and I get my set within 2 days max, instructions and PLUGS that make it plug n play not to mention they actually warranty bulbs...
  8. yooformula

    strange rattle from front end...

    a bit late but I found out that if you replace the calipers and dont insert the rubber isolators in with the caliper slide bolts that it will wiggle and make that noise. with the truck on the ground and not pressing the brake, grab the caliper and see if you can move it around, if so, then its...
  9. yooformula

    Special for Members

    is the stepper motor replacement the fix for the dead speedos? mine just randomly slows down to only 10-20mph.
  10. yooformula

    does my mpg seem right

    that exactly what I was getting to a full tank of gas before the low gas light would come on. I did the same things you did plus swapped out all the fluids in the diffs, t-case and trans, new o2 sensors, seafoam and got a decent improvement but then I ended up swapping plugs again with a...
  11. yooformula

    painted callipers

    looks good but your wheels need some love and you gotta paint the rears too.
  12. yooformula

    Sidesteps?

    I started using poorboy's "natural look" and was very impressed with it! I slipped one too many times using various other shit but the "natural look" left no greasy residue, wasnt slippery when wet and a single application last 2 months before a reapply. Everytime I washed the car a dry wipe...
  13. yooformula

    Finally upgraded my brakes!

    this truck has 185k and it wouldnt surprise me if they were still stockers. I too used the yellowstuff pads for the new setup but with stainless brake lines and new oem rotors/calipers.
  14. yooformula

    Finally upgraded my brakes!

    Finally got the rears done... When I bought my used truck the prev owner said it had new brakes all around and judging by all the work orders for stuff and how clean and obviously maintained it was, I didnt think otherwise. Well this ****** would barely stop whenever the wheels got wet so I...
  15. yooformula

    nothing is ever simple--> HID FOGS<-- for you electro-geniuses

    what kind of kit is that? mine came with plugs that just plugged into my stock wiring, no need to splice or tape anything.
  16. yooformula

    Anyone running withOUT catalytic converters?

    I had already all of the sensors a few months ago and since the truck did have 185k, it just seemed to be a safe bet the cats were done. sure enough the cats did sound like a rattle can when you shook them.
  17. yooformula

    Finally upgraded my brakes!

    the yellow is a more aggressive pad than the green. I just linked what I had saved at the time thats all. I would say its more of a personal preference unless your driving habits need a much more aggressive pad. I only upgraded my fronts so far and went with the green ones. I thought at the time...
  18. yooformula

    Finally upgraded my brakes!

    I dont know the actual miles on mine when I replaced them, they were on there when I bought the truck last year but the fronts werent even halfway worn and it took twice the distance to stop whenever it wet out.
  19. yooformula

    Finally upgraded my brakes!

    discounttiredirect has an ebay store and so far the cheapest I have found. rear green stuff pads front yellow stuff pads goodridge 5 pc stainless brakes lines(should have done this) ebc ultimax front rotors
  20. yooformula

    Finally upgraded my brakes!

    did you replace all pads or just the fronts? I was thinking about just using yellowstuff pads for the back with oem rotors to save some $$.
  21. yooformula

    Front bumper, fog light questions

    that would look awesome imo! I have been searching the local yards and cl for a sierra bumper with the foglights in it but no luck so far. Good luck on yours and post some pics!
  22. yooformula

    Anyone running withOUT catalytic converters?

    got them done finally but no smell while driving, now sitting at idle thats a different story! at the time, I couldnt find an offroad pipe that would work with factory manifolds(link posted was backordered) so I just had blank pipes welded in place but I did find afterwards, that Jegs sells an...
  23. yooformula

    New wheels....w/ pics

    badass!
  24. yooformula

    Finally upgraded my brakes!

    so far so good but I drove it just enough to seat the pads and I have to complete the rears to get the full effect of good brakes BUT there was a noticeable difference already!

Forum statistics

Threads
137,759
Posts
1,991,330
Members
102,743
Latest member
Mohq
Back
Top