Search results

  1. Jlaughtr

    My Bermuda Blue Hoe

    How do I know if I have a full float or semi-float?
  2. Jlaughtr

    My Bermuda Blue Hoe

    So my rear diff is finally leaking enough for me to fix it. So doing that next weekend. A few questions: 1)Gasket suggestions with P/N? 2)Any aftermarket Diff Covers to recommend?
  3. Jlaughtr

    Grill mounted light bar.

    I installed mine awhile back but it fits well and puts out good light. The curved worked best for me to go around all the coolers and what not.
  4. Jlaughtr

    My Bermuda Blue Hoe

    Finally got the lights wired up. LED light bar in the grill and 2 LED light pods for the aux reverse lights AUx Reverse Lights LED Light bar
  5. Jlaughtr

    My Bermuda Blue Hoe

    A little sand time at White Sands National Monument. Not allowed to off-road but still a pretty unreal place! Just white sand as far as you could see
  6. Jlaughtr

    My Bermuda Blue Hoe

    I attempted to wire my lights up yesterday too. I definitely won’t be adding anymore aftermarket lights to my truck.....that is for sure. The Fog Lights and Light bar in the grill were working perfect. The Aux Reverse Lights were not working right. They worked when the switch was on direct...
  7. Jlaughtr

    My Bermuda Blue Hoe

    So yesterday I finally got time to change the left front ABS/Speed Sensor. It’s super easy. 1) remove the tire 2)remove brake caliper and rotor 3)disconnect old sensor 4)connect new sensor 5)put everything back on Took about 30 minutes to do I got this Speed Sensor from 1A Auto
  8. Jlaughtr

    My Bermuda Blue Hoe

    C0035 Fix YouTube
  9. Jlaughtr

    My Bermuda Blue Hoe

    Threw a few codes driving to Tucson this weekend. C0035-Left Front Speed Sensor P1810-Transmission Pressure Switch Circuit The C0035 looks pretty easy to fix from a 1a Auto youtube, but hoping the P1810 is covered under my warranty from AAMCO when I got the transmission.
  10. Jlaughtr

    My Bermuda Blue Hoe

  11. Jlaughtr

    My Bermuda Blue Hoe

    They look great!
  12. Jlaughtr

    My Bermuda Blue Hoe

    After 2 years and 57,000 miles the old shoes are being retired. Keeping 2 of them because they had a ton of life left. New shoes being installed now!
  13. Jlaughtr

    My Bermuda Blue Hoe

    Also the electrical guru has me set up. He wired up all the relays and wrote all the wiring directions down for me. All I have to do is finish the wiring for all my lights. Haven't had too much time or money to buy the wires and such but now that the government shutdown is over I plan on getting...
  14. Jlaughtr

    My Bermuda Blue Hoe

    New Shoes coming this Saturday! I love my Cooper STT Pros, but with all the driving I've been doing I need to switch to a less aggressive tire. I've settled on the Nitto Ridge Grapplers. Its a hybrid between MT and AT. The tire actually has 2 sidewalls to choose from based on how you mount the...
  15. Jlaughtr

    My Bermuda Blue Hoe

    Also this weekend I was able to hang the Aux Reverse Lights! Been wanting to do this for awhile but last time the grille light bar took allllllll day. So for these I mounted them to the bottom of the bumper. Just removed the plastic piece under the license plate and low and behold there were...
  16. Jlaughtr

    My Bermuda Blue Hoe

    This weekend was productive for do small stuff to the 'Hoe! I fixed the switch panel issue and I also wanted to Feb up some new brackets for the light bar. My buddy in Memphis who can fab anything I need out of aluminum said I need to fab up mock brackets with something. So I mocked up brackets...
  17. Jlaughtr

    My Bermuda Blue Hoe

    So update to the switches on the dash, they were not able to sit flush because of a plastic bracket behind the panel. Decided to trim it off for the switches to rest flush in the hole of the panel this past weekend
  18. Jlaughtr

    My Bermuda Blue Hoe

    yea I guess that dexcool is orange and the tranny fluid is red. all looks the same when it leaks out on the ground ha! But super happy it wasn't the tranny.
  19. Jlaughtr

    My Bermuda Blue Hoe

    So after going to the Transmission shop Saturday morning (of course the leaked wasn't leaking while I was there), we were able to cancel out any tranny leaks. We were able to identify that the leak had a few places to monitor. I went to my shop today, turns out the water pump was the culprit of...
  20. Jlaughtr

    My Bermuda Blue Hoe

    I checked there already. That seams good. I might take the skid plate off tomorrow at lunch to see if I can get a better view. Seems to be coming from closer to the firewall. I search the forum and seems like people where having the same issue it’s either some quick disconnects or hose...
  21. Jlaughtr

    My Bermuda Blue Hoe

    As always when you are trying to do cool shit to your truck, the Hoe inevitably laughs at you with a truck issues that needs to be fixed and pulls you away from the mods. AS of right now I have a leak. I am about 80% sure its antifreeze. Its leaking from the back of the engine compartment...
  22. Jlaughtr

    My Bermuda Blue Hoe

    Thanks! Have a few more tweeks and the wiring to do but i like how it turned out
  23. Jlaughtr

    My Bermuda Blue Hoe

    So to wrap up my activities. I was able to mount the LED light bar. But i was not able to run the electricity and wiring. The relay that came with the kit had the wires fall out and you cannot reattach them. I had an extra relay for the aux reverse lights so I tried to use that one. It was a bad...
  24. Jlaughtr

    My Bermuda Blue Hoe

    I also mounted the aftermarket switches inside on the dash below the steering wheel. The switch holder I used gave the mounting measurements. I measured slightly smaller to have room for error. Drilled the 4 corners and used a dremel to cut out. I mounted 3 switches for future use. I'm going to...
  25. Jlaughtr

    My Bermuda Blue Hoe

    The other issue that i ran into was when I put the grille back on. The light bar didn't give enough space to put it back on. So I had to lower the brackets I made to below horizontal level. That way I could bend it back towards the motor. The driver's side is more tricky because you have to...

Forum statistics

Threads
138,115
Posts
1,999,477
Members
103,038
Latest member
Conedaddy

Latest posts

Back
Top